[1]龚宝龙.机架式通用服务器机箱应变仿真及测试分析[J].机械与电子,2015,(05):44-46.
　GONG Baolong.Strain Test and Simulation Analysis of Rack-mounted Server Chassis[J].Machinery & Electronics,2015,(05):44-46.
点击复制

机架式通用服务器机箱应变仿真及测试分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年05期
页码:
44-46
栏目:
自动控制与检测
出版日期:
2015-05-25

文章信息/Info

Title:
Strain Test and Simulation Analysis of Rack-mounted Server Chassis
文章编号:
1001-2257(2015)05-0044-03
作者:
龚宝龙
(浪潮电子信息产业股份有限公司高效能服务器与存储技术国家重点实验室,山东 济南 250101)
Author(s):
GONG Baolong
(Inspur Electronics information Industry Co.,Ltd.,State Key Laboratory of High-end Server and Storage Technology,Jinan 250101,China)
关键词:
机架式服务器;  应变测试;  结构仿真;  机箱设计
Keywords:
rack-mounted server;  strain test;  structural simulation;  chassis design
分类号:
TH124
文献标志码:
A
摘要:
采用电阻应变片电测法及有限元模拟仿真技术,对机架式通用服务器机箱满载静置状态下的应变进行测量及分析,得出机箱的应变分布规律及整机变形特征。研究结果表明,硬盘的重载导致机箱前侧的应变普遍偏大; 机架式通用服务器机箱等效应变最大值位于机箱底座底面边前侧折弯处; 机箱最大变形量位于机箱前侧中间处; 机箱最大等效应变值及变形量皆满足设计要求; 仿真及测试结果误差小于10%,仿真结果可靠。
Abstract:
By applying resistance strain gauge measuring method and the finite element method simulation technology,the strain rule of rack-mounted server chassis under full load state and deformation feature were measured and analyed.According to research results,large strain occurs on the front of chassis because of heavy hard disks.The maximum equivalent strain is located on the front bending parts of the chassis base bottom and the maximum deformation is located on the front middle parts of the chassis base.Maximum equivalent strain and deformation meet the design requirements.The result error of simulation and test is less than 10%,so the simulation results are reliable.

参考文献/References:

[1] 袁丽,黄江丰.小型加固机机箱结构及防护设计[J].现代制造工程,2012(7):123-125.
[2] Cavazzuti M,Baldini A,Bertocchi E,et al.High performance automotive chassis design:a topology optimization based approach[J].Structural and Multidisciplinary Optimization,2011,44(1):45-56.
[3] 郑俊,赵红旺,朵兴茂.应力应变测试方法综述[J].汽车科技,2009(1):5-8.
[4] Borhana A,Ali H O,Tamin M N. Large Strain Shear Compression Test of Sheet Metal Specimens[J].Experimental Mechanics,2013,53(8):1449-1460.
[5] Khoei A R,Bakhshiani A.A hypoelasto-plastic finite strain simulation of powder compaction processes with density-dependent endochronic model[J].International Journal of Solids and Structures,2004,41(22-23):6081-6110.
[6] 蒲传金,郭学彬,肖正学,等.护壁爆破动态应变测试及分析[J].煤炭学报,2008,33(10):1163-1167.
[7] 杨长牛,赵鹏云.常用钣金件有限元分析及刚度优化设计[J].机械与电子,2010(06):75-78.

备注/Memo

备注/Memo:
收稿日期:2014-10-31
基金项目:国家高技术研究发展计划(863计划)(2013AA01A208)
作者简介:龚宝龙(1988-),男,山西太原人,硕士,工程师,研究方向为服务器机箱结构设计。
更新日期/Last Update: 2015-05-25