[1]杨海燕,高阳臻,袁 森,等.烧蚀作用下石墨焊接池与电极接触行为研究[J].机械与电子,2023,41(05):3-6.
　YANG Haiyan,GAO Yangzhen,YUAN Sen,et al.Research on the Contact Behavior of Graphite Welding Pool and Electrode under Ablation[J].Machinery & Electronics,2023,41(05):3-6.
点击复制

烧蚀作用下石墨焊接池与电极接触行为研究()
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
41
期数:
2023年05期
页码:
3-6
栏目:
设计与研究
出版日期:
2023-05-25

文章信息/Info

Title:
Research on the Contact Behavior of Graphite Welding Pool and Electrode under Ablation
文章编号:
1001-2257 ( 2023 ) 05-0003-04
作者:
杨海燕 1 ; 高阳臻 2 ; 袁 森 2 ; 3 ; 龙 琴 2
1. 贵州电子信息职业技术学院,贵州 凯里 556000 ; 2.贵州大学机械工程学院, 贵州 贵阳 550025 ; 3. 贵州理工学院机械工程学院,贵州 贵阳 550003
Author(s):
YANG Haiyan1 ;  GAO Yangzhen2 ;  YUAN Sen2 ;  3 ;  LONG Qin2
( 1.Guizhou Vocational Technology College of Electronics and Information , Kaili 556000 , China ; 2.School of Mechanical Engineering , Guizhou University , Guiyang 550025 , China ; 3.School of Mechanical Engineering , Guizhou Institute of Technology , Guiyang 550003 , China )
关键词:
Cu / Ni 金属丝; 深熔钎焊; 接触电阻; 烧蚀
Keywords:
Cu / Ni metal wires ;  penetration brazing ;  contact resistance ;  ablation
分类号:
TG454
文献标志码:
A
摘要:
通过测试分析不同石墨焊接池表面形貌、烧蚀率等性能,提出石墨焊接池均匀退化烧蚀特征,建立以线烧蚀系数为表征的烧蚀状态下动态接触电阻模型。且通过实验验证分析了 15 N 夹持力作用下,石墨表面烧蚀作用对接触电阻的影响。结果表明:石墨焊接池在直径方向的烧蚀速率较大,石墨表面烧蚀作用使得界面接触电阻呈缓慢增加趋势,普通石墨的烧蚀对界面接触电阻的影响相较于精细石墨的作用更加明显,并且模型的计算值与实测值基本一致,误差在合理范围内,保证了模型建立的合理性和准确性。
Abstract:
Through testing and analyzing the surface morphology and ablative rate of different graphite welding pools , the uniform degradation ablative characteristics of graphite welding pools were proposed , and the dynamic contact resistance model characterized by linear ablative coefficient was established.The influence of graphite surface ablation on contact resistance under 15 N clamping force was verified and analyzed by experiments.The results show that : the ablative rate of graphite welding pool in the diameter direction is large , and the ablative effect of graphite surface makes the interface contact resistance increase slowly.The effect of ordinary graphite ablation on the interface contact resistance is more obvious than that of fine graphite , and the calculated value of the model is basically consistent with the measured value , and the error is within a reasonable range , ensuring the rationality and accuracy of the model.

参考文献/References:

[ 1 ] 冯治国,何林,黄勤 .Cu / Ni 异种细直径金属丝自动钎焊设备研制[ J ] . 焊接技术, 2014 , 43 ( 2 ): 48-52 , 8.

[ 2 ] KAARS J , MAYR P , KOPPE K.Generalized dynamic transition resistance in spot welding of aluminized 22MnB5 [ J ] .Materials and design , 2016 , 106 : 139-145.
[ 3 ] RIBA J R , MANCINI A G , ABOMAILEK C , et al.A 3D-FEM-based model to predict the electrical constriction resistance of compressed contacts [ J ] .Measurement , 2018 , 114 : 44-50.
[ 4 ] 冯治国,胡蕤,刘雄风,等 .Cu / Ni 金属丝深熔钎焊中石墨烧蚀对接触电阻的影响研究[ J ] . 热加工工艺, 2019 ,48 ( 3 ): 212-216.
[ 5 ] LEE S , SUNDARARAGHAVAN V.Multi-scale modeling of moving interface problems with flux and field jumps : Application to oxidative degradation of ceramic matrix composites [ J ] .International journal for numerical methods in engineering , 2011 , 85 ( 6 ):784-804.
[ 6 ] 何发龙,李旭东,杨德军 .C / C 复合材料耦合性烧蚀过程的数值预测 [ J ] . 化工新型材料, 2016 , 44 ( 5 ):109-111.
[ 7 ] LI W J , HUANG H M , XU X L.A coupled thermal / fluid / chemical / ablation method on surface ablation of charring composites [ J ] .International journal of heat and mass transfer , 2017 , 109 : 725-736.
[ 8 ] LI K Z , LIU G X , ZHANG Y L.Ablation properties of HfB2?coatings prepared by supersonic atmospheric plasma spraying for SiC-coated carbon / carbon composites [ J ] .Surface and coatings technology , 2019 , 357 :48-56.
[ 9 ] FENG G H , LI H J , YAO X Y , et al.Ablation resistance of HfC-TaC / HfC-SiC alternate coating for SiC coated carbon / carbon composites under cyclic ablation [ J ] .Journal of the European ceramic society ,2021 , 41 ( 6 ): 3207-3218.
[ 10 ] HOLM R.Electric contacts : theory and application[ M ] .New York : Springer , 2013.
[ 11 ] LI B T , HONG J , SHAO G Q , et al.An integrated mechanical-electrical predictive model of electrical contact resistance between two rough surfaces [ J ] . Tribology transactions , 2015 , 58 ( 3 ): 537-548.

备注/Memo

备注/Memo:
收稿日期: 2022-12-13
基金项目:国家自然科学基金资助项目( 51664006 );贵州省科技计划项目(黔科合平台人才[ 2017 ] 5788 号)
作者简介:杨海燕 ( 1986- ),女,四川乐至人,讲师,研究方向为先进制造技术。
更新日期/Last Update: 2023-05-23