[1]杨晓龙,胡 泓,赵运星.双丝杠驱动在视觉检测中的模型建立与分析[J].机械与电子,2015,(02):40-43.
　YANG Xiaolong,HU Hong,ZHAO Yunxing.Modeling and Analysis of Double Screw Drive in the Visual Detection[J].Machinery & Electronics,2015,(02):40-43.
点击复制

双丝杠驱动在视觉检测中的模型建立与分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年02期
页码:
40-43
栏目:
机电一体化技术
出版日期:
2015-02-25

文章信息/Info

Title:
Modeling and Analysis of Double Screw Drive in the Visual Detection
文章编号:
1001-2257(2015)02-0040-04
作者:
杨晓龙1; 胡 泓1; 赵运星2
(1.哈尔滨工业大学深圳研究生院,广东 深圳 518055; 2.深圳明锐理想科技有限公司,广东 深圳 518055)
Author(s):
YANG Xiaolong1; HU Hong1; ZHAO Yunxing2
(1.Harbin Institute of Technology Shenzhen Graduate School,Shenzhen 518055,China;2.Shenzhen Magic-ray Technology Co.Ltd.,Shenzhen 518055,China)
关键词:
双丝杠驱动;  单丝杠驱动;  视觉检测;  耦合
Keywords:
double screw drive;  single screw driving;  visual inspection;  coupling
分类号:
TP23
文献标志码:
A
摘要:
在表面封装技术(SMT)及光学自动检测(AOI)领域,传统的单丝杠驱动已经不能满足精度和速度的要求,而双丝杠驱动能够抑制高速时振动,还能提高系统的刚性和响应速度,从而防止因进给平台抖动而引起视野(FOV)的偏移,以及给拼图带来困难,并最终导致检测误判。本文就双丝杠驱动系统进行建模与分析,并结合实验给予验证。
Abstract:
In the field of optical automatic detection(AOI)of surface mounted technology(SMT),the traditional single screw drive would have been unable to meet the requirements of precision and speed.But the double screw driver can not only suppress vibration at high speed,but also improve the rigidity and response speed of the system to prevent the field of view(FOV)offset caused by the feed platform vibration,and bring the difficulty to the puzzle,and eventually led to the detection of miscarriage of justice.In this paper,we model and analyze the double screw drive system, and make some experiments for the double screw driving system.

参考文献/References:

[1] 谭德宇,李欣,谭隽宁.数控机床双丝杠驱动的研究[J].机电产品开发与创新,2009(5):186-187.
[2] 何王勇,唐小琦,李勇波.基于有限元的双滚珠丝杠同步驱动轴动力学建模与分析[J].2010(12):83-86.
[3] Yong Z.Torsion vibration analysis of lead-screw feed drives with changeable position and work-piece mass[J].Mechatronics and Automation,ICMA,2007,2194-2199.
[4] Cheng Ying,Qin Haichen,Quan Jianzhou.Synchronized control of dual linear motors position servo system based on multi-axes motion control card[C]//International Conference on Electrical Engineering and Automatic Control,2010.

备注/Memo

备注/Memo:
收稿日期:2014-11-12
基金项目:广东省科技计划项目(2012B011300014); 深圳市科技计划项目(JCY2014041717241709)
作者简介:杨晓龙(1985-),男,重庆大足人,硕士研究生,研究方向为机电一体化,机器视觉与自动化。
更新日期/Last Update: 2015-02-25