[1]赵红连.基于薄壁圆盘双面磨削工艺研究[J].机械与电子,2015,(03):46-49.
　ZHAO Honglian.Grinding Machining Technology Research Based on Double Side Thin-disc[J].Machinery & Electronics,2015,(03):46-49.
点击复制

基于薄壁圆盘双面磨削工艺研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年03期
页码:
46-49
栏目:
机电一体化技术
出版日期:
2015-03-25

文章信息/Info

Title:
Grinding Machining Technology Research Based on Double Side Thin-disc
文章编号:
1001-2257(2015)03-0046-04
作者:
赵红连
(核工业理化工程研究院,天津 300180)
Author(s):
ZHAO Honglian
(Research Institute of Physical and Chemical Engineering of Nuclear Industry,Tianjin 300180,China)
关键词:
薄壁圆盘;  双面磨削;  专用砂轮;  最优切削参数
Keywords:
thin-disc;  double width grinding;  special grinding wheel;  optimum parameter
分类号:
TL92+2
文献标志码:
A
摘要:
提出了一种新的磨削加工方法,即采用双端面磨削技术代替原有平面磨削技术。从理论分析采用双面磨削的可行性,研制专用双端面数控磨削设备,进行双端面磨削专用砂轮的试验研制,解决了磨削特殊弹簧钢,硬而粘,磨削性不好,大面积一次去屑率高的工艺难点。采用单因素试验法,进行双面磨削工艺参数试验研究,确定了最优磨削参数组合,并进行实验验证加工工艺的可行性。解决了工件端面跳动合格率低的问题,磨削效率提高了5倍,并成功应用于大批量生产加工中。
Abstract:
A new machining method for grinding is presented—The surf grinding was substituted by double-width grinding. The new technology of double-width grinding is analyzed theoretically. Special numberical control equipment was developed.Working theories and technique features of a new grinding wheel driven by double-width grinding were introduced, and while hard and sticky special spring steel was cutting in a poor performance problem was also solved.The optimum parameters of grinding were discovered by single factor experiments.It finally sorted out the problem that a low ending beat acceptance rate and the efficiency has increaseed 5 times.The technic has been successfully adopted in the manufacture.

参考文献/References:

[1] 博弈创作室.ANSYS9.0经典产品基础教程与实例详解[M].北京:水利水电出版社,2006.
[2] 博弈创作室.APDL参数化有限元分析技术及其应用实例[M].北京:水利水电出版社,2004.
[3] 孙凤池,王先逵.机械加工工艺手册(第2卷)加工技术篇[M].2版.北京:机械工业出版社,2007.
[4] 单成.金属切削机床夹具设计手册[M].2版.北京:机械工业出版社,1995.
[5] 张幼桢.金属切削理论[M].北京:航空工业出版社,1987.
[6](美)Montgomery D C.实验设计与分析[M].傅珏生,张健,王振羽,等译.北京:中国邮电出版社,1998.

备注/Memo

备注/Memo:
收稿日期:2014-10-17
作者简介:赵红连(1972-),女,山西临县人,高级工程师,研究方向为机械制造工艺。
更新日期/Last Update: 2015-03-25