[1]赵红连.碳纤维薄壁圆筒车削加工工艺研究[J].机械与电子,2015,(05):20-22.
　ZHAO Honglian.Study on the Turning Technology of the Thin Cylinder of Carbon Fiber[J].Machinery & Electronics,2015,(05):20-22.
点击复制

碳纤维薄壁圆筒车削加工工艺研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年05期
页码:
20-22
栏目:
设计与研究
出版日期:
2015-05-25

文章信息/Info

Title:
Study on the Turning Technology of the Thin Cylinder of Carbon Fiber
文章编号:
1001-2257(2015)05-0020-03
作者:
赵红连
(核工业理化工程研究院,天津 300180)
Author(s):
ZHAO Honglian
(Research Institute of Physical and Chemical,Engineering of Nuclear Industry,Tianjin 300180,China)
关键词:
碳纤维薄壁圆筒;  车削加工;  最优切削参数
Keywords:
the thin cylinder of carbon fiber;  turning technology;  optimum parameter
分类号:
TL92.2
文献标志码:
A
摘要:
对碳纤维复合材料薄壁圆筒车削加工工艺进行分析研究,主要从工件的加工特性、切削颤振对工件加工精度的影响进行分析,研制专用定位夹紧装置,进行切削刀具几何参数研究试验与确定,采用正交实验方法进行切削试验,确定最优切削参数组合,通过实验验证该加工工艺的可行性。解决了薄壁碳纤维圆筒加工中出现拉丝起毛、装夹变形和加工变形的关键技术难点,确定的加工工艺方法应用于生产实践中,取得了显著效果。
Abstract:
This paper analyses and researches the technological methods of the thin walled cylinder of carbon fiber reinforced plastics.The influence of processing characteristics and cutting vibration has been analyzed by experiment for the work pieces.Special mechanism for champing and positioning was developed, at the same time choice of geometry technical parameters and materials were experimentally determined.Orthogonal experiments were used to make sure the optimal cutting parameters,verified the feasibility of the process through experiments.Cracked the key technical difficulties such as wire drawing,burrs and the deformation of champing and machining.It had made significant effect to apply the processing technology to the production.

参考文献/References:

[1] 周泽华.金属切削原理[M].上海:上海科学技术出版社,1992.
[2] 机械加工工艺手册,第2卷.加工技术卷[M].北京:机械工业出版社,2006.
[3] 袁哲俊,刘华明.刀具设计手册[M].北京:机械工业出版社 1999.
[4] 朱红兵.应用统计与SPSS应用[M].北京:电子工业出版社,2011.
[5] Dauglasc,Montgomery.实验设计与分析[M].汪仁官,陈荣昭,译.北京:中国统计出版社,1998.

备注/Memo

备注/Memo:
收稿日期:2014-10-31
作者简介:赵红连(1972-),女,山西临县人,高级工程师,研究方向为机械制造工艺研究与应用。
更新日期/Last Update: 2015-05-25