[1]王瑜瑜,刘少军.基于WinCC的变频器多段速控制监控系统的设计[J].机械与电子,2015,(05):62-65.
　WANG Yuyu,LIU Shaojun.Design of Tranducer Multi-segment Speed Control Monitoring System Based-on the WinCC[J].Machinery & Electronics,2015,(05):62-65.
点击复制

基于WinCC的变频器多段速控制监控系统的设计
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年05期
页码:
62-65
栏目:
自动控制与检测
出版日期:
2015-05-25

文章信息/Info

Title:
Design of Tranducer Multi-segment Speed Control Monitoring System Based-on the WinCC
文章编号:
1001-2257(2015)05-0062-04
作者:
王瑜瑜; 刘少军
(西安航空职业技术学院,陕西 西安 710089)
Author(s):
WANG Yuyu; LIU Shaojun
(Xi'an Aeronautical Polytechnic Institute,Xi'an 710089,China)
关键词:
变频器;  PLC;  WinCC;  监控
Keywords:
tranducer;  PLC;  WinCC;  monitoring
分类号:
TE937
文献标志码:
A
摘要:
针对工业生产中电动机多段速调速控制的问题,采用了西门子S7-200PLC 控制 MM440 变频器实现多段速调速控制,并通过WinCC监控软件和PLC通信对整个系统进行监控,检测电机的实时转速,真正达到实时监控的目的。详细阐述了MM440变频器3种实现多段速调速的控制方式,并对变频器的参数设置、PLC程序设计及监控画面的制作进行了讲解。实践证明:系统电路设计简单、成本低、功能完善,具有一定的应用价值。
Abstract:
This paper achieves the control of multi-segment speed using Siemens S7-200 PLC controlling MM440 converter according to the problem of motor multi-segment speed control in the industrial production.The system can detect the real-time of motor speed and truly achieve real-time monitoring purpose through the WinCC monitoring software and PLC communication controlling the whole system.This thesis detailedly describes three multi-segment speed control modes of the MM440 inverter and explains the parameters set of the inverter,the PLC program design,the production of the monitoring picture.Experiments prove that the system circuit is simple,low cost,perfect function,and has certain application value.

参考文献/References:

[1] 张燕宾.变频器应用教程[M].北京: 机械工业出版社,2007.
[2] 张士磊,赵新蕖.基于PLC和组态软件的变频器监控系统设计[J].工矿自动化,2010,36(3):101-103.
[3] 王芹.可编程控制器技术及应用[M].天津:天津大学出版社, 2008.
[4] 张文明.组态软件控制技术[M].北京:清华大学出版社, 2006.
[5] 杜菲,张新.基于MCGS组态软件的自动车库门控制系统设计[J].起重运输机械,2009(2):47-49.

相似文献/References:

[1]卢旭锦,谢伟彬.基于PLC的槟榔自动切割机电气控制线路的开发[J].机械与电子,2018,(07):39.
　LU Xujin,XIE Weibin.Development of Electrical Control Circuit of Betel Nut Automatic Cutting Machine Based on PLC[J].Machinery & Electronics,2018,(05):39.
[2]方喜峰,王凯,朱成顺,等.船用柴油机气缸盖自动装配生产线设计与研究[J].机械与电子,2017,(09):30.[doi:1001-2257(2017)09-0030-04]
　FANG Xifeng,WANG Kai,ZHU Chengshun,et al.Research and Design of Automatic Assembly Line for Marine Diesel Engine Cylinder Head[J].Machinery & Electronics,2017,(05):30.[doi:1001-2257(2017)09-0030-04]
[3]苗荣霞,王洁.基于PLC的氨氮检测控制系统设计[J].机械与电子,2017,(10):66.[doi:1001-2257(2017)10-0066-03]
　MIAO Rongxia,WANG Jie.Design of Ammonia Nitrogen Detection and Control System Based on PLC[J].Machinery & Electronics,2017,(05):66.[doi:1001-2257(2017)10-0066-03]
[4]谢兆雄,刘忠凯,潘军军,等.PLC在某型工程车辆模拟维修系统中的应用[J].机械与电子,2016,(01):43.
　XIE Zhaoxiong,LIU Zhongkai,PAN Junjun,et al.Application of PLC in the Maintenance Simulation System for a Type of Engineering Vehicle[J].Machinery & Electronics,2016,(05):43.
[5]王 立,黄晓华,陈国三,等.新型粘性物料烘干机控制系统的设计[J].机械与电子,2015,(12):10.
　WANG Li,HUANG Xiaohua,CHEN Guosan,et al.Design of Control System for New Type of Viscous Material Dryer[J].Machinery & Electronics,2015,(05):10.
[6]代兴明,杨晓勇.沉降罐耙机电气控制系统的优化设计[J].机械与电子,2015,(03):43.
　DAI Xingming,YANG Xiaoyong.Optimization Design of the Thickener Raker Electrical Control System[J].Machinery & Electronics,2015,(05):43.
[7]王瑜瑜,刘少军.基于MCGS的自动门监控系统的设计[J].机械与电子,2015,(03):63.
　WANG Yuyu,LIU Shaojun.Design of Automatic Door Monitoring System Based on the MCGS[J].Machinery & Electronics,2015,(05):63.
[8]任亚军,赵 明.盾构机刀盘变频驱动控制系统研究[J].机械与电子,2015,(04):44.
　REN Yajun,ZHAO Ming.Research on Frequency Conversion Control of Tunnel Boring Machine's Cutter Head Driving System[J].Machinery & Electronics,2015,(05):44.
[9]孙莉莉,雷永锋,何 挺.饮料调配水净化处理控制系统设计[J].机械与电子,2019,(12):47.
　,Design of Beverage Preparation and Water Purification Treatment Control System[J].Machinery & Electronics,2019,(05):47.
[10]陈 亮.海上平台采油井电潜泵机械故障信号提纯研究[J].机械与电子,2023,41(06):71.
　CHEN Liang.Research on the Purification of Mechanical Fault Signal of Electric Submersible Pump in Offshore Platform Production Well[J].Machinery & Electronics,2023,41(05):71.

备注/Memo

备注/Memo:
收稿日期:2014-12-02
作者简介:王瑜瑜(1983-),女,山东烟台人,硕士研究生,研究方向为计算机控制和自动化理论研究; 刘少军(1982-),男,陕西西安人,实验师,研究方向为电力电子自动化控制技术。
更新日期/Last Update: 2015-05-25