[1]徐 红,李广慧,谭光宇,等.HSK-A63测温刀柄的结构设计及模态分析[J].机械与电子,2015,(06):64-66.
　XU Hong,LI Guanghui,TAN Guangyu,et al.Structural Design and Modal Analysis of HSK-A63 Tool Holderwith Temperature Measurement[J].Machinery & Electronics,2015,(06):64-66.
点击复制

HSK-A63测温刀柄的结构设计及模态分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年06期
页码:
64-66
栏目:
自动控制与检测
出版日期:
2015-06-26

文章信息/Info

Title:
Structural Design and Modal Analysis of HSK-A63 Tool Holder with Temperature Measurement
文章编号:
1001-2257(2015)06-0064-03
作者:
徐 红1; 李广慧2; 谭光宇2; 郭林林2; 魏 波2
(1.济南大学泉城学院工学院,山东 蓬莱 265600; 2.广东海洋大学工程学院,广东 湛江 524088)
Author(s):
XU Hong1; LI Guanghui2; TAN Guangyu2; GUO Linlin2; WEI Bo2
(1.Faculty of Engineering, Quancheng Institute, University of Jinan,Penglai 265600,China; 2.Faculty of Engineering,Guangdong Ocean University,Zhanjiang 524088,China)
关键词:
HSK-A63刀柄;  模态分析;  固有频率和振型
Keywords:
HSK-A63 tool holder;  modal analysis;  natural frequency and mode shapes
分类号:
TG714
文献标志码:
A
摘要:
为了便于测量立铣刀铣削温度,通过改进HSK-A63刀柄的结构,把测温数据采集模块安装到刀柄内部,设计出热电偶测温刀柄。利用Pro/E5.0软件建立嵌入式测温刀柄主体、弹簧夹头/螺母、立铣刀的三维实体模型并进行装配,在ANSYS Workbench中确立合理的边界条件和网格划分的基础上对装配体进行模态分析,得出固有频率和振型。
Abstract:
In order to measure the end milling temperature of end mills and by improving the HSK-A63 tool holder structure, a temperature measurement data acquisition module was installed into the tool holder and a thermocouple tool holder with temperature measurement was designed.A three-dimensional solid model of the tool holder with temperature measurement was established and assembled along with a spring chuck/nut and flat end mill using a software program called Pro/E 5.0. Boundary constraints and meshing in finite element model were imposed and natural frequency and mode shapes of the tool holder assembly were calculated by modal analysis using ANSYS Workbench.

参考文献/References:

[1] Bakkal M,Shih A J,Scattergood R O.Chip formation,cutting forces,and tool wear in turning of Zr-based bulk metallic glass[J].International Journal of Machine Tools & Manufacture,2004(44):915-925.
[2] 王贵成,王树林,董广强.高速加工工具系统[M].北京:国防工业出版社,2005.
[3] Zhang S,Ai X,Tang W X,et al.Balancing of tool/toolholder assembly for high-speed machining[J].Materials Science Forum,2004,471(2):542-546.
[4] 沈春根.高速加工工具系统的动力学特性及应用基础研究[D].镇江:江苏大学,2011.
[5] 袁哲俊,刘华明.孔加工刀具、铣刀、数控机床用工具系统[M].北京:机械工业出版社,2009.
[6] Agapiou J,Rivin E,Xie C.Toolholder -spindle interfaces for CNC machine tools[J].CIRPAnnals-Manufacturing Technology,1995,44(1):383-387.
[7] 韩清凯,于涛,王德友,等.故障转子系统的非线性振动分析与诊断方法[M].北京:科学出版社,2010.

相似文献/References:

[1]张世杰,梁 乐,马清伍,等.高速重载码垛机器人刚柔耦合模型建立及动态特性分析方法[J].机械与电子,2016,(01):67.
　ZHANG Shijie,LIANG Le,MA Qingwu,et al.A Method for Rigid-flexible Coupling Modeling and Dynamic Characteristic Analysis of High-speed and Heavy-load Palletizing Robots[J].Machinery & Electronics,2016,(06):67.
[2]梅 宇.基于RADIOSS模态分析的电路板抗振设计的研究[J].机械与电子,2015,(01):18.
　MEI Yu.Study on the Anti Vibration Design of Circuit Board Based on RADIOSS Modal Analysis[J].Machinery & Electronics,2015,(06):18.
[3]张卫亮.养护车起吊装置有限元模态分析[J].机械与电子,2015,(05):16.
　ZHANG Weiliang.Maintenance Vehicle Lifting Device Finite Element Modal Analysis[J].Machinery & Electronics,2015,(06):16.
[4]王 雨,冯 颖,高东强,等.圆度仪工作台系统设计及分析[J].机械与电子,2015,(05):40.
　WANG Yu,FENG Ying,GAO Dongqiang,et al.Design and Analysis of Roundness Measuring Instrument Worktable System[J].Machinery & Electronics,2015,(06):40.
[5]张永凯,田 伟,王汝冬,等.交叉滚柱导轨运动台模态研究[J].机械与电子,2015,(08):30.
　ZHANG Yongkai,TIAN Wei,WANG Rudong,et al.Modal Research of Crossed-roller Bearings Motion Stage[J].Machinery & Electronics,2015,(06):30.

备注/Memo

备注/Memo:
收稿日期:2015-01-16
基金项目:国家自然科学基金资助项目(51375099)
作者简介:徐 红(1988-),女,山东成武人,硕士研究生,研究方向为数字化设计与制造技术。
更新日期/Last Update: 2015-06-26