[1]杜永英,孙志礼,吕春梅.JF系列某型电连接器组件端子可靠性研究[J].机械与电子,2015,(09):11-15.
　DU Yongying,SUN Zhili,LYU Chunmei.Reliability Study on Terminal Contact Parts of Electrical Connector of JF Series[J].Machinery & Electronics,2015,(09):11-15.
点击复制

JF系列某型电连接器组件端子可靠性研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年09期
页码:
11-15
栏目:
设计与研究
出版日期:
2015-09-25

文章信息/Info

Title:
Reliability Study on Terminal Contact Parts of Electrical Connector of JF Series
文章编号:
1001-2257(2015)09-0011-05
作者:
杜永英1; 2; 孙志礼1; 吕春梅1
(1.东北大学机械工程与自动化学院,辽宁 沈阳 110819; 2.沈阳化工大学,辽宁 沈阳 110142)
Author(s):
DU Yongying1; 2; SUN Zhili1; LYU Chunmei1
(1.School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China; 2.Shenyang University of Chemical Technology,Shenyang 110142,China)
关键词:
电连接器;  可靠性;  ANSYS仿真;  振动应力
Keywords:
electrical connectors;  reliability;  ANSYS simulation;  vibration stress
分类号:
TH113
文献标志码:
A
摘要:
深入研究和分析了JF系列某型电连接器的组件端子在随机振动应力作用下的接触失效情况,由组件端子的失效机理及其运动状态构建出理论力学模型,考虑理论模型分析及实际失效情况,提出组件端子在随机振动作用下的可靠性增长方法。构建JF系列某型电连接器的组件端子插拔力的数学模型并对插拔力进行了分析,确定了插拔力的变化趋势及各因素之间的关系。参照相关手册确定了组件端子插拔力的取值范围,得出在取值范围内振动应力作用下组件端子接触失效随插拔力的增加而降低的结论。建立JF系列某型电连接器单针孔接触对的有限元仿真模型,并利用此模型模拟了电连接器接触件的插合与分开过程,得到接触面最大和最小插拔力时的应力和应变分布图以及随时间变化图。
Abstract:
This paper studies the terminal contact failure of JF-series electric connector under random vibration stress, and presents the relative motion state and mechanical model from the failure mechanisms of terminal contact parts. A reliability growth program for electrical connector under random vibration stress is then proposed based on theoretical model analysis and actual failures the mathematical model of insertion and extraction force of terminal parts of JF Series electrical connector is established and analyzed, to determine in the relationship between the variation tendencies of insertion and extraction force and other factors. The conclusion that the data range of the terminal component insertion and extraction force is determined with reference to the relevant manuals where contact failure reduces as the insertion and extraction force increase within the data range is reached. Good correlation between the simulation results and those predicted from the theory models were obtained by establishing simulation experiment on the separation process of electric connector contact pair. The finite element simulation model of single pin and sock contact pair is developed, to simulate the dynamic behavior of the contacts, and to obtain the figure of the stress and strain distribution and variation with time for contacts at the time of the maximum and minimum insertion force.

参考文献/References:

[1] Angadi S V, Jackson R L, Choe S Y, et al. A multiphysics finite element model of a 35a automotive connector including multiscale rough surface contact[J].Journal of Electronic Packaging,2012, 134(1):1001-1012.
[2] Wada S, Sawa K. Degradationphenomenon of electrical contacts by 3-D oscillating mechanism[C]//Proceedings of the 54th IEEE Holm Conference on Electrical Contacts, 2008:284-293.
[3] Ju Y, Amano M, Chen M J. Mechanical and electrical cold bonding based on metallic nanowire surface fasteners[J].Nanotechnology, 2012,23(36):1006-1011.
[4] Fu R J, Choe S Y, Jackson R L,et al. Modeling and analysis ofvibration-induced changes in connector resistance of high power electrical connectors for hybrid vehicles [J].Mechanics Based Design of Structures and Machines. 2012,40(3):1517-1522.
[5] Noel S, Correia S, Alamarguy D, et al.Fretting behaviour of various intermetallic compounds in electrical contactsInfluence on reliability [J].Wear,2011, 271(9):1515-1523.
[6] Sakairi M,Tateno T,Tamura A.Simulation method for connector packaging[J].Fujitsu Scientific & Technical Journal,2010, 46(3):299-306.
[7] Belakhdar R,Noel S,Alamarguy D,et al. Effect of fluorinated lubricants on the friction modes of tin electrical contacts submitted to fretting[J].European Physical Journal-applied Physics,2010, 49(2):143-145.
[8] Swingler J.Enhancing connector reliability by using conducting polymer materials to minimise contact fretting[J].Materials & Design,2009, 30(10):3935-3942.
[9] Daniel C,Mucklich F, Mueller J, et al.Characterization of periodic micro-/nano-patterns for wear minimization of electrical contacts[J].Praktische Metallographie,2003, 40(8):377-386.
[10] 杜永英,孙志礼,王宇宁,等.基于热分析电连接器的温度应力的研究[J].机械设计与制造,2013(10):42-44.
[11] 姚立真.可靠性物理[M]. 北京:电子工业出版社, 2004.
[12] 胡仁喜,龙凯,党沙沙,等.ANSYS13.0多物理耦合场有限元分析从入门到精通[M].北京:机械工业出版社,2012.
[13] 国防科学技术工业委员会.GJB 1216—91 电连接器接触件总规范[S].北京:国防科工委军标出版发行部.

相似文献/References:

[1]孙远涛,谢 标,冯明扬.考虑热环境下某数字阵列模块的结构设计与热设计[J].机械与电子,2018,(01):7.
　SUN Yuantao,XIE Biao,FENG Mingyang.Structural and Thermal Design of Digital Array Module in Thermal Environment[J].Machinery & Electronics,2018,(09):7.
[2]王宇宁,宁保国,印明昂.多状态系统的生产计划与预防性维修计划的集成优化[J].机械与电子,2018,(02):39.
　WANG Yuning,NING Baoguo,YIN Mingang.Integrated Optimization of Production Plan and Preventive Maintenance Plan for Multi-State System[J].Machinery & Electronics,2018,(09):39.
[3]崔允浩,李树军.变胞机构构态变换可靠性分析模型[J].机械与电子,2016,(01):31.
　CUI Yunhao,LI Shujun.The Reliability Analysis Model of Constraint Metamorphic Mechanism Configuration Transformation[J].Machinery & Electronics,2016,(09):31.
[4]王海涛,陈 星,段斐翡.三参数威布尔分布模型在系统的可靠性评估中的应用[J].机械与电子,2015,(03):78.
　WANG Haitao,CHEN Xing,DUAN Feifei.Estimation the System Reliability based on 3-Parameter Weibull Distribution Model[J].Machinery & Electronics,2015,(09):78.
[5]胡欲立,杨树森.电机控制器的热效应模拟研究[J].机械与电子,2015,(04):15.
　HU Yuli,YANG Shusen.Thermal Analysis Simulation Studies of Motor Controller[J].Machinery & Electronics,2015,(09):15.

备注/Memo

备注/Memo:
收稿日期:2015-04-09
基金项目:国家自然科学基金资助项目(51305071)
作者简介:杜永英(1975-),女,辽宁辽阳人,博士研究生,讲师,研究方向为机械可靠性工程; 孙志礼(1957-),男,山东巨野人,教授,博士研究生导师,研究方向为机械可靠性工程。
更新日期/Last Update: 2015-09-25