[1]熊 涛,姚廷强,黄雅成.滑动轴承等效刚度阻尼的计算分析方法[J].机械与电子,2015,(12):14-18.
　XIONG Tao,YAO Tingqiang,HUANG Yacheng.Research on Stiffness Damping Characteristics of Sliding Bearing Based on FLUENT[J].Machinery & Electronics,2015,(12):14-18.
点击复制

滑动轴承等效刚度阻尼的计算分析方法
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年12期
页码:
14-18
栏目:
设计与研究
出版日期:
2015-12-25

文章信息/Info

Title:
Research on Stiffness Damping Characteristics of Sliding Bearing Based on FLUENT
文章编号:
1001-2257(2015)12-0014-05
作者:
熊 涛; 姚廷强; 黄雅成
(昆明理工大学机电工程学院,云南 昆明 650500)
Author(s):
XIONG Tao; YAO Tingqiang; HUANG Yacheng
(School of Mechanical and Electric Engineering,Kunming University of Science and Technology,Kunming 650500)
关键词:
滑动轴承;  动网格;  刚度阻尼;  多截面;  多工况
Keywords:
sliding bearing;  dynamic grid;  stiffness and damping;  damping;  variable section
分类号:
TH133
文献标志码:
A
摘要:
为获得更精确的滑动轴承等效油膜支承,针对滑动轴承沿轴向方向存在不同的刚度阻尼,将滑动轴承沿轴向方向等分为多个截面,探索了滑动轴承多截面等效刚度阻尼的计算分析方法。基于N-S方程,结合FLUENT中的动网格方法,建立了多截面、多工况的滑动轴承仿真分析模型,计算得到沿轴向方向的多截面和不同转速下单一截面的径向等效刚度阻尼的变化规律,为进一步考虑滑动轴承等效结合部参数的转子系统动力学研究提供了参考依据。
Abstract:
In order to obtain more accurate equivalent oil film bearing for sliding bearing, as stiffness and damping vary along the axis of sliding bearing, the bearing is divided into several cross sections to research the analysis method to calculate the equivalent stiffness damping. Based on N-S equations, using dynamic grid model of FLUENT, the simulation analysis model of variable section and condition for sliding bearing is built, and laws of variation of equivalent stiffness damping of onesection along the axis and in different rotation speeds is obtained. This provides reference basis for the further studies of the integration of the joint equivalent parameters of the rotor system dynamics.

参考文献/References:

[1] Guo Z L,Hirano T,Gordon Kirk R.Application of CFD analysis for rotating machinery-Part I:hyd- Rostatic bearings and squeeze film damper[J].Jou- Rnal of Engineering for Gas Turbines and Pow- Er,2005,127(2):445-451.
[2] 孙丹,张楚,郭瑞,等.基于两相流理论滑动轴承动力特性求解[J].航空动力学报,2012,27(12):2821-2827.
[3] 张楚,杨建刚,郭瑞,等.基于两相流理论的滑动轴承流场计算分析.中国电机工程学报[J],2010,30(29):80-84.
[4] Chang H X,Minel J Braun,Hongmin Li.Damp- Ing and added mass coefficients for a squeezeFilm damper using the full 3-D Navier-StokesEquation[J].TribologyInternational,2010,43:654-666.
[5] Gertzos,Nikola K P.CFD analysis of journal be- aring hydrodynamic lubrication by Bingham lu- bricant[J].TribologyInternational,2008,41(12):1190-1204.
[6] 侯志泉.基于CFD动网格方法的液体静压主轴回转精度机理研究[D].长沙:湖南大学,2013.
[7] 董勋.润滑理论[M].上海:上海交通大学出版社,2001.
[8] 徐龙祥.高速旋转机械轴系动力学设计[M].北京:国防工业出版社,1994.
[9] Ghosh M K,Majumdar B C,Rao J S.Steady-state and dynamic behaviour of multi-re- cess hybrid oil journal bearing[J].Journal of Mechanical Engineering Scinence,1979,21(5):345-351.

备注/Memo

备注/Memo:
收稿日期:2015-09-10
基金项目:国家自然研究科学基金项目(11002062,1462008); 昆明理工大学引进人才启动基金资助项目(KKSA201101018)
作者简介:熊 涛(1990-),男,湖北荆州人,硕士研究生,研究方向为机械系统动力学; 姚廷强(1979-),男,四川资阳人,副教授,研究方向为轴承动力学及其系统学.
更新日期/Last Update: 2019-12-25