[1]郑夕健,冯勃.擦窗机钢丝绳在特殊工况下动载荷分析[J].机械与电子,2016,(10):19-24.
 ZHENG Xijian,FENG Bo.Dynamic Load Analysis of Steel Wire Rope of Window Cleaning Equipment Under Special Conditions[J].Machinery & Electronics,2016,(10):19-24.
点击复制

擦窗机钢丝绳在特殊工况下动载荷分析
分享到:

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2016年10期
页码:
19-24
栏目:
设计与研究
出版日期:
2016-10-20

文章信息/Info

Title:
Dynamic Load Analysis of Steel Wire Rope of Window Cleaning Equipment Under Special Conditions
作者:
郑夕健冯勃
(沈阳建筑大学机械工程学院,辽宁 沈阳110168)
Author(s):
ZHENG Xijian FENG Bo
(College of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China)
关键词:
钢丝绳动载荷刚度阻尼比
Keywords:
steel wire rope dynamic load stiffnessdamping ratio
分类号:
TU976.42
文献标志码:
A
摘要:
以擦窗机提升钢丝绳为研究对象,基于机械振动理论,建立了擦窗机吊重悬空静止时突然起升、吊重匀速下降时突然制动、吊重被突然提升离地三种工况的动力学模型。通过MATLAB软件仿真出不同工况下钢丝绳动载荷随时间变化的关系。以钢丝绳的刚度和结构阻尼比为变量,研究其对钢丝绳动载荷的影响。结果表明,选用刚度较大的钢丝绳能够有效缩减振动系统的震荡时间,对钢丝绳所受的最大动载荷值影响甚微。随着钢丝绳的阻尼比增大,能够有效地减小钢丝绳震荡的稳定时间和钢丝绳所受最大动载荷。为擦窗机结构设计和动态特性优化提供理论参考。
Abstract:
Taking the lifting steel wire rope of window cleaning equipment as research object, dynamics models were established based on the theory of mechanical vibration, including three dynamics models: building maintenance unit dangling hoist sudden lifting at rest, hoist sudden braking and hoist sudden lifting off land. Then simulation analysis of the relationship between dynamic load of wire rope and time was done through MATLAB, where the stiffness of rope and structural damping ratio are main variables. It turned out that the time of system vibration reduced by using rope of large stiffness which, however, had no effect on the maximum dynamic load of wire rope. At the same time, with the increase of the damping ratio of the wire rope the stable time and the maximum dynamic load of the steel rope can be reduced effectively. This research provides theoretical reference for structure design and dynamic analysis of window cleaning equipment.

参考文献/References:

[1]薛抱新,祝志锋. 高层建筑擦窗机的选型与建筑设计要求[J]. 建筑科学,2004(1):65-71.
[2]邓法金. 大学物理[M]. 北京:科学出版社,2004.
[3]方志刚. 格构式塔机起升动载系数与结构动载效应研究[D].哈尔滨:哈尔滨工业大学,2007.
[4]张梅军,曹勤. 工程机械动力学[M].北京:国防科技出版社,2012.
[5]石端伟. 机械动力学[M]. 北京:中国电力出版社,2007.
[6]程贤福,肖人彬. 基于公理化设计理论的起重机起升机构分析[J]. 机械设计,2005(1): 45-47.
[7]XM Ren, YB Ye. Resonance between automorphic forms and exponential functions [J]. Science China (Mathematics),2010(9): 2463-2472.
[8]倪松远. 钢丝绳机械性质的研究[D].哈尔滨:东北林业大学,2004.
[9]吕志民,徐金梧. 大型构件动态固有频率和阻尼系数辨识方法[J]. 机械工程学报,2001(6):72-75.
[10]ZBBZH/GJ 4 -2001,建筑结构抗震规范[S].
[11]JGJ 99-2015,高层民用建筑钢结构技术规程[S].

相似文献/References:

[1]杨福芹,李 冬,王学志,等. 近海清污收集船结构的动力学分析[J].机械与电子,2019,(09):8.
 ,,et al.Dynamic Analysis of the Structure of Offshore Clearance Collection Ship[J].Machinery & Electronics,2019,(10):8.
[2]张新才.基于摩擦轮的矿山提升系统效能研究[J].机械与电子,2019,(11):34.
 Research on the Efficiency of Mine Lifting System Based on Friction Wheel[J].Machinery & Electronics,2019,(10):34.
[3]叶杰凯,汤小明,胡建钦,等.基于 CSA-NARX 模型的电梯钢丝绳动态张力预测方法[J].机械与电子,2022,(09):7.
 YE Jiekai,TANG Xiaoming,HU Jianqin,et al.Prediction Method of Elevator Wire Rope Dynamic Tension Based on CSA-NARX Model[J].Machinery & Electronics,2022,(10):7.

备注/Memo

备注/Memo:
收稿日期:2016-07-04
基金项目: 住房和城乡建设部科学技术计划项目(2015-K3-018)
作者简介: 郑夕健(1963-),男,山东荣成人,教授,硕士研究生导师,研究方向为机械设计现代设计方法,建筑机械设计与产品开发,物流装备设计与仿真技术等;冯勃(1991-),男,辽宁铁岭人,硕士研究生,研究方向为机械设计现代设计方法。
更新日期/Last Update: 2016-10-25