[1]龚勇镇,许卢伟,陈添德,等.高效硬币清分机的设计与应用研究[J].机械与电子,2017,(07):39-42.
　GONG Yongzhen,XU Luwei,CHEN Tiande,et al.Design and Application of High Efficiency Coin Sorting Machine[J].Machinery & Electronics,2017,(07):39-42.
点击复制

高效硬币清分机的设计与应用研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2017年07期
页码:
39-42
栏目:
机电一体化技术
出版日期:
2017-07-25

文章信息/Info

Title:
Design and Application of High Efficiency Coin Sorting Machine
文章编号:
1001-2257(2017)07-0039-04
作者:
龚勇镇; 许卢伟; 陈添德; 邓昌奇; 乔东凯
(广东石油化工学院机电工程学院,广东 茂名 525000)
Author(s):
GONG Yongzhen;  XU Luwei; CHEN Tiande;  DENG Changqi;  QIAO Dongkai
(College of Mechanical and Electrical Engineering,Guangdong University of Petrochemical Technology,Maoming 525000,China)
关键词:
硬币清分;  优化;  高效率;  准确率
Keywords:
coin sorting;  optimization;  high efficiency;  accuracy rate
分类号:
TH122; TH693
文献标志码:
A
摘要:
设计了一种高效硬币清分机,介绍了其基本工作原理。对硬币分类机构进行了优化改进,设计了可靠的硬币清点模块,有效解决了叠币、甩币等问题。根据要求制作出了硬币清分机样机,并对其进行了多次试验。结果表明,该清分机运行可靠、清分效率和准确率高,具有广阔的应用前景。
Abstract:
This paper presents the design of a high efficiency coin sorting machine and its working principle. Firstly, the coin sorting mechanism was optimized; Then, a reliable coin counting module was designed, which solved the problems of coin stacking and coin flipping; Finally, a sample machine for coin sorting was produced according to the requirements, and tested for many times. The results show that the proposed machine is reliable with high efficiency and accuracy, which has broad application prospect.

参考文献/References:

[1] 任开锋,李凤英,宋志行,等.某机载雷达相控阵天线结构设计[J].电子机械工程,2010,26(2): 43-46.
[2] 宋敏,胡劲松,吴文志,等.机载高精度相控阵雷达天线阵面结构设计[J].电子机械工程, 2016,32(3):26-30.
[3] 王朋,侯守武,刘巍.某型无人机载雷达的结构设计[J].电子机械工程,2016,33(4):39-42.
[4] 殷东平,王亚锋.无人机载雷达碳纤维支架是工艺设计[J].雷达科学与技术,2016,14(4):443-447,452.
[5] 朱志远.机载雷达框架刚强度分析[J].机械与电子,2009(5):65-67.
[6] 洪长满,段勇军.机载雷达天线座结构的刚强度性能评估[J].现代雷达,2011,33(6):72-75.
[7] 李钊,王志海.基于有效模态质量优选法的机载雷达随机振动分析[J].电子机械工程,2015,31(1):1-6.

相似文献/References:

[1]魏 静.采用Matlab和误差函数法对轨迹生成四杆机构的优化及仿真[J].机械与电子,2016,(01):11.
　WEI Jing.Using Matlab and Error Function Method for Trajectory Generation Optimization and Simulation of Four-bar Mechanism[J].Machinery & Electronics,2016,(07):11.
[2]张 兵,邓子龙.夹具实验台液压系统的仿真与优化[J].机械与电子,2015,(01):45.
　ZHANG Bing,DENG Zilong.Simulation and Optimization for Clamp Experiment Table Hydraulic System[J].Machinery & Electronics,2015,(07):45.
[3]高金海,邓子龙.六自由度并联柔性机构设计分析与优化[J].机械与电子,2015,(03):26.
　GAO Jinhai,DENG Zilong.Optimization and Analysis of Design for 6-DOF Compliant Parallel Manipulator[J].Machinery & Electronics,2015,(07):26.
[4]陈中孝,王 沛,张 盼.野外文物安防姿态传感器的信号优化设计[J].机械与电子,2015,(07):64.
　CHEN Zhongxiao,WANG Pei,ZHANG Pan.Optimized Design of Posture Sensor Signals in Wild Heritage Security System[J].Machinery & Electronics,2015,(07):64.

备注/Memo

备注/Memo:
收稿日期:2017-04-25
基金项目:国家自然科学基金资助项目(61672174); 广东省科技计划资助项目(2014A010106033); 茂名市科技计划资助项目(201613)
作者简介:龚勇镇(1983-),男,湖南湘潭人,硕士研究生,讲师,主要从事机械设计与制造、机电一体化与材料加工方面的研究。
更新日期/Last Update: 2017-07-25