[1]李松梅,赵伟琨,常德功.新型纸堆翻转机的结构设计及研究[J].机械与电子,2017,(07):47-51.
　LI Songmei,ZHAO Weikun,CHANG Degong.Structural Design and Research of New Paper-Pile Upender[J].Machinery & Electronics,2017,(07):47-51.
点击复制

新型纸堆翻转机的结构设计及研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2017年07期
页码:
47-51
栏目:
机电一体化技术
出版日期:
2017-07-25

文章信息/Info

Title:
Structural Design and Research of New Paper-Pile Upender
文章编号:
1001-2257(2017)07-0047-05
作者:
李松梅; 赵伟琨; 常德功
(青岛科技大学机电工程学院,山东 青岛 266061)
Author(s):
LI Songmei; ZHAO Weikun; CHANG Degong
(College of Electromechanical Engineering,Qingdao University of Science and Technology,Qingdao 266061,China)
关键词:
纸堆翻转机;  夹紧装置;  推拉装置;  旋转装置
Keywords:
paper stack upender;  clamping device;  push-pull device;  rotating device
分类号:
TH69
文献标志码:
A
摘要:
针对目前纸堆翻转问题,设计出纸堆翻转机的新型结构,包括夹紧装置、旋转装置、推拉装置和基座4个部分,通过理论分析确定各部分的连接和运行方式,选择合适的动力源。利用SolidWorks软件对新型结构进行三维建模,应用力学公式和理论对翻转机的结构参数进行了计算和校核,然后通过有限元分析功能对翻转机的关键零部件进行了静力学分析,验证结构方案的可行性。同时,对新型结构的功能及特点进行了归纳,总结了纸堆翻转机设计中的关键点,为翻转装置的研究和开发提供了借鉴。
Abstract:
Focusing on the current paper pile turnover problems, this research designs a new structure of paper pile upender which consists of four parts as the clamping device, the rotating device, the push-pull device, and the base. Firstly, through the theoretical analysis, the connection and operation mode of the parts was determined, and the appropriate power source was selected. Secondly, the 3D modeling of the new structure was established by the SolidWorks software, and the structural parameters of the upender were calculated and verified by using the mechanical formula and theory. Then, the static analysis was conducted on the key parts of the upender by the finite element analysis, and the feasibility of the structure scheme was validated. Finally, the functions and characteristics of the new structure as well as the key points in designing the paper pile upender were summarized, providing references for the research and development of the turnover device.

参考文献/References:

[1] 余丽霞,马社,崔云俊.小型高精度恒温箱设计与应用[J].环境技术,2012(3):58-61.
[2] 邬琦,杨江涛.一种恒温箱温度控制系统的设计与实现[J].计算机测量与控制,2014,22(8):2455-2458.
[3] 汤锴杰,栗灿,王迪,等.基于DS18B20的数字式温度采集报警系统设计[J].传感器与微系统,2014,33(3):99-102.
[4] 吕俊亚.一种基于单片机的温度控制系统设计与实现[J].计算机仿真,2012,29(7):230-233.
[5] 申中鸿,杨林,刘群兴,等.高低温试验箱温湿度控制技术研究[J].伺服控制,2013(7):55-57.
[6] Zhang Z Y,Guo T L.Design of water bath temperature control system on DS18B20[J].Advanced Materials Research,2012,462:753-756.
[7] 陈婕羽.恒温箱温度计算机控制系统[J].硅谷,2015(4):13,27.
[8] Liu X R,Gao G H.Temperature monitoring system based on AT89C51[J].Advances in Computer Science,Intelligent System and Environment,2011,104:601-605.
[9] Armendariz J,Treesatayapun C,Baltazar A.Force feedback controller based on fuzzy-rules emulated networks and Hertzian contact with ultrasound[J].Mechanical Systems and Signal Processing,2012,27:534-550.
[10] 李俊涛.基于H桥驱动电路的半导体制冷片恒温控制系统[J].北华大学学报(自然科学版),2010,11(5):464-466.

备注/Memo

备注/Memo:
收稿日期:2017-03-28
作者简介:李松梅(1986-),女,山东青岛人,博士,硕士研究生导师,研究方向为机械设计、机械传动、现代设计方法学与计算机辅助设计; 赵伟琨(1989-),男,山东青岛人,硕士研究生,研究方向为机械设计及理论、新型传动机构。
更新日期/Last Update: 2017-07-25