[1]孙军,吴方凯.基于CompactRIO实现进给系统便捷式测控系统的研究[J].机械与电子,2017,(08):32-35.[doi:1001-2257(2017)08-0032-04]
　SUN Jun,WU Fangkai.Research on Portable Measurement and Control System of Feed System Based on CompactRIO[J].Machinery & Electronics,2017,(08):32-35.[doi:1001-2257(2017)08-0032-04]
点击复制

基于CompactRIO实现进给系统便捷式测控系统的研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2017年08期
页码:
32-35
栏目:
机电一体化技术
出版日期:
2017-08-25

文章信息/Info

Title:
Research on Portable Measurement and Control System of Feed System Based on CompactRIO
作者:
孙军; 吴方凯
(沈阳建筑大学机械工程学院,辽宁 沈阳 110168)
Author(s):
SUN Jun; WU Fangkai
(College of Mechanical Engineering,Shenyang Jianzhu University,Shenyang 110168,China)
关键词:
进给系统;  CompactRIO;  测控;  温度采集
Keywords:
feed system;  CompactRIO;  monitoring and control;  temperature acquisition
分类号:
TH166; TG659
DOI:
1001-2257(2017)08-0032-04
文献标志码:
A
摘要:
为满足对数控机床的运动控制和状态监测的需求,开发了一套基于CompactRIO的便捷式测控系统。该测控系统下位机包括进给系统的运动控制和加工现场信号采集两部分,上位机则通过LabVIEW软件,在FPGA模式下编写的测控程序进行实时控制及信号的分析处理、显示和预警等功能。测试结果显示,该系统较为理想地实现了进给系统的测控需求,能实时有效监测其运行状态。基于CompactRIO系统的体积小、质量轻、精度高、扩展性强等优点,能有效实现多通道多传感器的便捷式测控系统开发。
Abstract:
A set of portable measurement and control system based on CompactRIO was developed to meet the demands for motion control and state monitoring of CNC machine tools. The lower computer of the system was composed of the parts of motion control and processing site signal acquisition, while the upper computer performed real-time control, signal analysis and display, and early warning via the measurement and control program written by LabVIEW software under the FPGA mode. The test results show that the system is ideal for the measurement and control of the feed system, and can effectively monitor its running status in real time. With the features of small size, light weight, high precision, good scalability and other advantages, the CompactRIO-based system can be used to develop portable multi-channel and multi-sensor measurement and control system.

参考文献/References:

[1]王勃, 杜宝瑞, 王碧玲. 机床智能数控机床及其技术体系框架[J]. 航空制造技术, 2016, 504(9): 55-61.
[2]陈莉. 基于网络的数控机床状态远程监测系统设计[J]. 科学中国人, 2016(11Z): 43-43.
[3]蒋贤海, 张铁. 数控机床智能监控与状态识别方法研究[J]. 组合机床与自动化加工技术, 2016(8): 71-73.
[4]李鸣, 游彬, 张宇. 基于 CompactRIO 的嵌入式车载电性能测试系统研发[J]. 测控技术, 2016, 35(10): 142-145.
[5]SARKAR S, HEMBRAM P K, PURKAIT P, et al. Acquisition and pre-processing of three phase induction motor stator current signal for fault diagnosis using FPGA, NI Compact-RIO real time controller[C]//Electrical, Computer and Electronics Engineering(UPCON), 2016 IEEE Uttar Pradesh Section International Conference on. IEEE, 2016: 110-114.
[6]吴智哲, 闫希, 徐涛, 等. 基于 CompactRIO 的便携式航空发动机频率测试系统[J]. 测控技术, 2016, 35(12): 106-109.
[7]CAI J, PAN Y, WEI W. The design and implementation of distributed data acquisition system based on ether CAT and compactRIO[C]//Instrumentation & Measurement, Computer, Communication and Control(IMCCC), 2016 Sixth International Conference on. IEEE, 2016: 509-512.
[8]THIYAGARAJAN K, KUMAR R S. Real time energy management and load forecasting in smart grid using compactRIO[J]. Procedia Computer Science, 2016, 85: 656-661.
[9]郑文华, 刘渊, 余婷, 等. 基于 CompactRIO 的四旋翼飞控实时仿真平台设计[J]. 计算机测量与控制, 2016, 24(2): 275-278.

备注/Memo

备注/Memo:
收稿日期：2017-05-11
基金项目：辽宁省自然科学基金项目(2013020035)；辽宁省科技计划项目(2013220017)
作者简介：孙军(1963-)，男，辽宁大连人，教授，博士，硕士研究生导师，研究方向为机电一体化技术、精密和超精密加工技术； 吴方凯(1991-)，男，安徽池州人，硕士研究生，研究方向为机械设计及理论研究。
更新日期/Last Update: 2017-08-25