[1]袁晓建,胡泓,陈坚.面向点胶技术位移放大机构的设计与分析[J].机械与电子,2018,(03):19-22.
　YUAN Xiaojian,HU Hong,CHEN Jian.Design and Analysis of Displacement Amplification Mechanism for Dispensing Technology[J].Machinery & Electronics,2018,(03):19-22.
点击复制

面向点胶技术位移放大机构的设计与分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年03期
页码:
19-22
栏目:
机电一体化技术
出版日期:
2018-03-24

文章信息/Info

Title:
Design and Analysis of Displacement Amplification Mechanism for Dispensing Technology
文章编号:
1001-2257(2018)03-0019-04
作者:
袁晓建; 胡泓; 陈坚
(哈尔滨工业大学深圳研究生院,广东 深圳 518055)
Author(s):
YUAN Xiaojian;  HU Hong;  CHEN Jian
(Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, China)
关键词:
点胶技术;  压电陶瓷;  柔性铰链;  放大机构
Keywords:
dispensing technology;  piezoelectric ceramics;  flexural hinge;  amplification mechanism
分类号:
TP23
文献标志码:
A
摘要:
设计了一种适用于点胶技术的位移放大机构,并采用了一种全新的位移放大比计算公式作为结构设计的理论依据。通过实验测试发现放大比的仿真结果与实际值误差在10%以内,最后通过点胶平台测试了该放大机构点胶的可行性以及点胶的一致性。
Abstract:
A displacement amplification mechanism for dispensing technology was designed, the theoretical foundation of which is a new displacement amplification ratio formula. The experimental result shows that the error between the simulation ratio and the actual one is within 10%. In addition, the feasibility and consistency of dispensing is verified through the dispensing platform.

参考文献/References:

[1]崔德琦,覃程锦,吴欣远.点胶技术在SMT中的应用[J].工业设计,2011(6):114.
[2]Jouaneh M,Yang R.Modeling of flexure-hinge type lever mechanisms[J].Precision Engineering,2003, 27(4): 407-418.
[3]Chu C L,Fan S H.A novel long-travel piezoelectric-driven linear nanopositioning stage[J].Precision Engineering, 2006, 30(1): 85-95.[4]Ma H W, Yao S M, Wang L Q, et al. Analysis of the displacement amplification ratio of bridge-type flexure hinge[J].Sensors and Actuators A:Physical, 2006, 132(2): 730-736.
[5]Qi K Q, Xiang Y, Fang C, et al.Analysis of the displacement amplification ratio of bridge-type mechanism[J].Mechanism and Machine Theory, 2015, 87: 45-56.
[6]Xu Q S, Li Y M. Analytical modeling, optimization and testing of a compound bridge-type compliant displacement amplifier[J].Mechanism and Machine Theory,2011,46(2):183-200.
[7]Silva E C N, Nishiwaki S, Kikuchi N. Topology optimization design of flextensional actuators[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000, 47(3): 657-671.
[8]Dogan A, Uchino K, Newnham R E.Composite piezoelectric transducer with truncated conical endcaps “cymbal”[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,1997,44(3):597-605.
[9]Chen J, Yuan X,Hu H.Design of bridge-type displacement amplifier with right-circle flexural hinges[C]//2017 IEEE International Conference on Information and Automation(ICIA),2017: 226-230.

备注/Memo

备注/Memo:
收稿日期：2017-11-18
基金项目：国家自然科学基金资助项目（51375118）；深圳市科技计划项目（JCYJ20160330161701343，JCYJ20170413105740689）
作者简介：袁晓建（1991-），男，湖北广水人，硕士，研究方向为机电一体化；胡泓（1965-），男，重庆人，教授，研究方向为微机电系统。
更新日期/Last Update: 2018-03-24