[1]王美焰,李科选,王新海.某雷达天线子阵多级盲配设计[J].机械与电子,2018,(09):16-19.
　WANG Meiyan,LI Kexuan,WANG Xinhai.Multi-level Blind Mating Design of a Radar Antenna Sub-array[J].Machinery & Electronics,2018,(09):16-19.
点击复制

某雷达天线子阵多级盲配设计()
分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年09期
页码:
16-19
栏目:
设计与研究
出版日期:
2018-09-24

文章信息/Info

Title:
Multi-level Blind Mating Design of a Radar Antenna Sub-array
文章编号:
1001-2257(2018)09-0016-04
作者:
王美焰; 李科选; 王新海
(中国电子科技集团公司第三十八研究所, 安徽 合肥 230088)
Author(s):
WANG Meiyan; LI Kexuan; WANG Xinhai
(No. 38 Research Institute of CETC, Hefei 230028, China)
关键词:
天线子阵; 多级盲配; 公差分析
Keywords:
antenna sub-array;  multi-level blind mating; tolerance analysis
分类号:
TN957.2
文献标志码:
A
摘要:
针对某雷达天线子阵多级盲配设计要求，提出分级盲配控制原则，减少误差累积与传递。对天线子阵各设备的导向、定位、助插拔等盲配结构进行分类与模块化设计，以简化系统公差控制，提高通用性。基于极值与统计公差分析方法，对天线子阵各级盲配构建分析模型，根据公差分析结果改进设计，相比传统经验设计，有效提高产品质量，降低成本。
Abstract:
Aiming at the design requirements of multi-level blind mating of a radar antenna sub-array, the hierarchical control principles of blind mating proposed to reduce error accumulation and transmission. The classification and modular design of the blind mating structures of the antenna sub-array devices, such as orientation, positioning, and plug-and-pull, were designed to simplify system tolerance control and improve generality. Based on extremum and statistical tolerance analysis method, an analysis model was built for blind mating at all levels of the antenna sub-array, and the design was improved according to the results of the tolerance analysis, which can effectively improve the product quality and reduce the cost compared with traditional experience design.

参考文献/References:

[1]唐宝富, 钟剑锋, 顾叶表.有源相控阵雷达天线结构设计[M].西安：西安电子科技大学出版社, 2016.6-10.
[2]吕慎刚,赵春林.盲配互连设计在T/R组件中的应用[J].电子机械工程, 2014,30(6):19-21,26.
[3]赵新,李鹏忠,张为民，等.公差分析技术在雷达天线设计中的应用[J].现代雷达, 2007,29(7):68-71.
[4]钟元.面向制造和装配的产品设计指南[M]. 北京：机械工业出版社, 2011

备注/Memo

备注/Memo:
 收稿日期：2018-06-11
作者简介：王美焰（1985－），男，安徽潜山人，高级工程师，研究方向为雷达结构设计。
更新日期/Last Update: 2019-11-01