[1]钟仕华,常思勤,谭草.双向作用脉冲电磁铁测试系统的研究[J].机械与电子,2018,(12):47-50.
 ZHONG Shihua,CHANG Siqin,TAN Cao.Study on the Testing System of Bidirectional Impulse Electromagnet[J].Machinery & Electronics,2018,(12):47-50.
点击复制

双向作用脉冲电磁铁测试系统的研究()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年12期
页码:
47-50
栏目:
自动控制与检测
出版日期:
2018-12-24

文章信息/Info

Title:
Study on the Testing System of Bidirectional Impulse Electromagnet
文章编号:
1001-2257(2018)12-0047-04
作者:
钟仕华常思勤谭草
(南京理工大学机械工程学院,江苏 南京 210094)
Author(s):
ZHONG ShihuaCHANG SiqinTAN Cao
(School of  Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China)
关键词:
测试系统双向作用脉冲电磁铁LabVIEW直线伺服电机数字信号处理器
Keywords:
testing systembidirectional impulse electromagnetLabVIEWlinear servo motorDSP
分类号:
TH134;TP274
文献标志码:
A
摘要:
为了实现对自行研制的双向作用脉冲电磁铁的性能测试,设计实现了基于LabVIEW的电磁铁测试系统。该测试系统以直线伺服电机为模拟负载,解决了电磁铁中永磁体作用力与电磁作用力共存的测试难题。系统通过数字信号处理器TMS320F2812进行控制和数据采集,可重点测试双向作用脉冲电磁铁在不同位置处的保持力和启动力。实验表明,该测试系统操作简便,有良好的测试精度,同时也验证了双向作用脉冲电磁铁的优越性能。
Abstract:
In order to realize the performance test of the self developed bidirectional impulse electromagnet,a test system was designed based on LabVIEW. The testing system used linear servo motor as the simulation load, and solved the test problem of the permanent magnet force and the electromagnetic force coexisting in the electromagnet. The testing device was controlled and the data was collected by Digital Signal Processor(DSP) TMS320F2812. The retaining force and starting force at different positions were tested emphatically. Experimental results suggest that the system was easy to operate and had good test accuracy. In addition, it also verified the superior performance of the bidirectional impulse electromagnet.

参考文献/References:

[1]马立玲,王军政,赵江波,等.电磁铁静动态性能测试系统研究与应用[J].液压与气动,2004(7):34-36.
[2]吴海锋,谢安桓,周华,等.位移型比例电磁铁的测试系统研究[J].液压与气动,2010(5):19-21.
[3]邵璠,王震,翟超.比例电磁阀性能测试系统开发[J]. 液压与气动,2014(6):102-104.
[4]陈晓齐,周克宁,刘晓林.基于虚拟仪器的电磁铁静态性能测试系统[J].液压与气动,2010(3):20-22.
[5]常思勤,刘梁.高功率密度的动圈式永磁直线电机:CN200710132009.8[P].2008-02-20.
[6]谭草,常思勤,刘梁,等.高驱动力密度短时工作电磁直线执行器研究[J].南京理工大学学报(自然科学版),2016, 40(5):509-514.
[7]苏奎峰,吕强,耿庆锋,等. TMS320F2812原理与开发[M].北京:电子工业出版社,2005.
[8]李瑞民.设备监控技术详解[M].北京:机械工业出版社,2013.
[9]彭勇,潘晓烨,谢龙汉. LabVIEW虚拟仪器设计及分析[M].北京:清华大学出版社,2011.

相似文献/References:

[1]李国维,王 庆,徐雪霞,等.电缆压接性能测试系统设计及实验[J].机械与电子,2020,(03):62.
 ,,et al.Design and Experiment of Cable Crimping Performance Test System[J].Machinery & Electronics,2020,(12):62.

备注/Memo

备注/Memo:
收稿日期:2018-07-26
基金项目:国家自然科学基金资助项目(51306090);上海航天创新基金资助项目(SAST2015095)
作者简介:钟仕华(1993—),男,江苏南通人,硕士研究生,研究方向为电磁铁测试系统; 常思勤(1954-),男,教授,博士研究生导师,研究方向为车辆电子控制及机电液一体化技术。
更新日期/Last Update: 2019-10-29