[1]吴艳英,吴锦行.基于有限元的XM-Z6023减速箱热固耦合分析[J].机械与电子,2018,(08):25-27,32.
　WU Yanying,WU Jinxing.Thermal-Solid Coupling Analysis of XM-Z6023 Reduction Gearbox Based on Finite Element Method[J].Machinery & Electronics,2018,(08):25-27,32.
点击复制

基于有限元的XM-Z6023减速箱热固耦合分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年08期
页码:
25-27,32
栏目:
设计与研究
出版日期:
2018-08-24

文章信息/Info

Title:
Thermal-Solid Coupling Analysis of XM-Z6023 Reduction Gearbox Based on Finite Element Method
文章编号:
1001-2257(2018)08-0025-03
作者:
吴艳英1; 吴锦行2
(1.贵州理工学院机械工程学院,贵州 贵阳 550003; 2.贵州民族大学机械电子工程学院,贵州 贵阳 550025)
Author(s):
WU Yanying1; WU Jinxing2
(1. Sochool of Mechanical Engineering Guizhou Institute of Technology,Guiyang 550003,China; 2.Sochool of Mechatronics Engineering Guizhou Minzu University, Guiyang 550025,China)
关键词:
热固耦合;  减速箱;  热应力;  ANSYS Workbench
Keywords:
thermal-mechanical coupling;  reduction gear box;  heat stress;  ANSYS Workbench
分类号:
TH122
文献标志码:
A
摘要:
针对XM-Z6023减速箱由于受热载荷发生的变形问题,应用ANSYS Workbench软件,对该减速箱进行热态稳定分析,再把热分析结果作为热载荷与静力载荷共同加载到减速箱静力分析模型中,得出减速箱的位移云图和应力分布图,减速箱的变形由静力载荷和热载荷共同作用。分析结果表明,热载荷与静载荷一起共同构成了引起减速箱变形的要素。热载荷是引起减速箱变形的重要因素之一,是进行减速箱数值分析,保证工作稳定可靠不可忽略的环节。
Abstract:
In view of the deformation of the XM-Z6023 gearbox due to the heat load, the ANSYS Workbench software is used to analyze the thermal stability of the gearbox. After that, the analysis results are loaded, as the thermal load and the static load, into the gearbox static force analysis model. The displacement cloud diagram and stress distribution diagram are thus obtained, which illustrates that the deformation of the gearbox is caused by the static load and the thermal load. The analysis results show that the thermal load and the static load together constitute the elements that cause the deformation of the gearbox. The thermal load is one of the important factors that cause the deformation of the gearbox, and it can be applied to the numerical analysis of the gearbox so as to ensure the stability and reliability of the operation.

参考文献/References:

[1] 梅益,王方平,刘乔英.重载减速箱有限元热-结构耦合分析研究[J].农机化研究,2011(8):58-60.
[2] 吴晓松,褚学宁.PECVD装置的有限元分析及结构优化[J].机械设计与制造,2013(07):1-3.
[3] 朱小海,程文明,邵建兵.大型门式起重机的风振特性研究[J].起重运输机械,2014(4):63-66.
[4] MERONEY R N.Comparison of numerical and wind tunnel simulation of wind loads on smooth,rough and dual domes immersed in a boundary layer[J].Wind and Structures,2002(5):2-4.
[5] JANG I G,KIM K S,KWAK B M.Conceptualand basic designs of the Mobile Harborcrane based on topology and shape optimiz-ation[J].Struct Multidisc Optim,2014(50):505-515.
[6] JERMAN B,KRAMAR J.A study of the horizontal intertial forces acting on the suspended load of slewing cranes [J].International Journal of Mechanical Sciences,2008(50):490-500.
[7] 杜宪峰,李志军,毕凤荣.基于拓扑与形状优化的柴油机体低振动设计[J].机械工程学报,2012,48(9):117-122.
[8] 戚松,赵洪伦,王社峰.运用ANSYS软件与蒙特卡罗法相结合的随机有限元方法进行车辆构件强度可靠性分析[J].铁道车辆,2009(2):6-9.
[9] 陈小刚.基于ANSYS的液压缸优化设计方法[J].液压与气动,2012(10):109-110.
[10] 郝立红.基于ANSYS的大型柱塞缸缸体的优化设计[J].机械研究与应用,2013(5):118-119.
[11] 丛明,房波,周资亮.车-车拉数控机床拖板有限元分析及优化设计[J].中国机械工程,2008,19(2):208-213.
[12] 刘永峰,孙宇,张新洲.基于ANSYS/PDS的高速冲床曲轴可靠性分析[J].锻压技术,2012,37(5):155-157.

相似文献/References:

[1]廖建敏,阳雪兵,陆 洁,等.风电机组主轴热固耦合特性研究[J].机械与电子,2020,(06):32.
　LIAO Jianmin,YANG Xuebing,LU Jie,et al.The Coupled Thermo-Mechanical Characteristics Research of Main Wind Turbine Shaft[J].Machinery & Electronics,2020,(08):32.

备注/Memo

备注/Memo:
收稿日期:2018-05-09
基金项目:贵州省科学技术厅、贵州理工学院科学技术联合基金项目(黔科合LH字[2014]7367号); 贵州省科学技术厅、贵州理工学院科学技术联合基金项目(黔科合LH字[2016]7078号)
作者简介:吴艳英(1985-),女,贵州安顺人,讲师,硕士研究生,研究方向为机械设计理论、机械优化设计; 吴锦行(1983-),男,福建龙岩人,讲师,研究方向为先进制造、表面质量。
更新日期/Last Update: 2018-08-24