[1]王 宁,李成求,罗 微,等.伺服软索智能提升装置的研制[J].机械与电子,2018,(11):24-28,33.
　WANG Ning,LI Chengqiu,LUO Wei,et al.Development of Intelligent Lifting Device for Servo Soft Cable[J].Machinery & Electronics,2018,(11):24-28,33.
点击复制

伺服软索智能提升装置的研制
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年11期
页码:
24-28,33
栏目:
设计与研究
出版日期:
2018-11-24

文章信息/Info

Title:
Development of Intelligent Lifting Device for Servo Soft Cable
文章编号:
1001-2257(2018)11-0024-05
作者:
王 宁; 李成求; 罗 微; 王 硕
(大连海事大学船舶与海洋工程学院,辽宁 大连 116000)
Author(s):
WANG Ning; LI Chengqiu; LUO Wei; WANG Shuo
(Institute of Naval Architecture and Marine Engineering,Dalian Maritime University,Dalian 116000,China)
关键词:
智能提升;  ADAMS动力学仿真;  机械设计;  Workbench;  AD1674;  MAX5312
Keywords:
intelligent lifting;  ADAMS dynamic simulation;  machine design;  Workbench;  AD1674;  MAX5312
分类号:
TH218
文献标志码:
A
摘要:
设计了一种新型的伺服软索智能提升装置。该装置机械结构的创新设计延长钢丝绳使用寿命,且装置整体轮廓为方形,控制系统的创新设计实现无极调速,精确定位,快速响应,缓起缓停,称重显示等功能。首先运用三维建模对装置进行结构设计,并基于ADAMS对钢丝绳沿卷筒绳槽缠绕的运动过程进行仿真研究,结合Workbench对卷筒和齿轮传动进行校核,设计控制系统中AD、DA模块,单片机最小系统的硬件电路,最后通过实际试验验证装置设计的合理性与可靠性。
Abstract:
A new type of intelligent lifting device for servo soft rope was designed. The innovative design of the mechanical structure of the device prolongs the service life of the steel wire rope,makes the outer contour of the device square, the innovative design of the control system realizes the functions of stepless speed regulation, accurate positioning, quick response, slow start and slow stop, weighing display and the like. Firstly, the structure of the device was designed by using three-dimensional modeling. based on ADAMS, the motion process of the steel wire rope winding along the winding drum rope groove was simulated and analyzed. combining with Workbench, the drum and gear transmission were checked. the AD and DA modules in the control system and the hardware circuit of the single-chip microcomputer minimum system were designed. Finally, the rationality and reliability of the device design were verified through actual experiments.

参考文献/References:

[1] 部绍明.智能提升系统的设计与研究[D].长沙:长沙理工大学,2009.
[2] 赵定元.国内钢丝绳电动葫芦的技术现状及发展方向[J].起重运输机械,2004(07):7-8.
[3] 李慧娟.电动葫芦发展现状分析与研究[J].时代农机,2017,44(06):93-93.
[4] 晋民杰,刘华伟,裴培,等.基于ADAMS宏程序的矿井提升机钢丝绳建模研究[J].矿山机械,2011,39(12):46-49.
[5] 曹建荣,姚庆梅,张玫.基于AD1674模数转换芯片的接口电路设计[J].青岛大学学报(工程技术版),2002(03):20-24.
[6] 王瑞琦,刘向阳,邹星兴,等.基于STC89C52RC单片机的电子称设计[J].国外电子测量技术,2017,36(05):94-97.

备注/Memo

备注/Memo:
收稿日期:2018-08-02
作者简介:王 宁(1994-),男,辽宁鞍山人,硕士研究生,研究方向为机电系统集成与智能化; 李成求(1964-),男,辽宁大连人,教授,硕士研究生导师,研究方向为机电产品开发。
更新日期/Last Update: 2018-11-24