[1]王 智,赵介军,俞建峰,等.风电扭矩限制器性能测控系统设计[J].机械与电子,2020,(10):32-36.
 WANG Zhi,ZHAO Jiejun,YU Jianfeng,et al.Design of Measurement and Control System for the Performance of Wind Power Torque Limiter[J].Machinery & Electronics,2020,(10):32-36.
点击复制

风电扭矩限制器性能测控系统设计()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2020年10期
页码:
32-36
栏目:
机电一体化技术
出版日期:
2020-10-15

文章信息/Info

Title:
Design of Measurement and Control System for the Performance of Wind Power Torque Limiter
文章编号:
1001-2257(2020)10-0032-05
作者:
王 智12赵介军3俞建峰12程洋12
1.江南大学机械工程学院, 江苏 无锡 214122;
2.江苏省食品先进制造装备技术重点实验室, 江苏 无锡 214 122;
3.无锡海关机电产品及车辆检测中心, 江苏 无锡 214174
Author(s):
WANG Zhi12ZHAO Jiejun3YU Jianfeng12 CHENG Yang12
1. School of Mechanical Engineering, Jiangnan University , Wuxi 214122,China
2.Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi 214122,China
3. Mechanical and Electrical Products and Vehicle Testing Center of Wuxi Customs, Wuxi 214174,China
关键词:
扭矩限制器测控系统可编程控制器Modbus-RTU协议伺服电机
Keywords:
torque limiter measurement and control system PLC Modbus-RTU protocol servo motor
分类号:
TP273
文献标志码:
A
摘要:
扭矩限制器是风力发电机组中用于过载保护的关键部件,但目前对其打滑扭矩、疲劳寿命等性能的测试存在流程复杂、自动化程度低、功能单一等缺点,为此设计了一种风电扭矩限制器性能测控系统。根据测控系统的功能要求,首先进行了硬件结构设计,选用PLC为下位机主控单元,工控机作为上位机管理及监控单元。随后采用组态软件设计了人机交互界面,并编写PLC控制程序,实现了对测控系统的控制和管理。经过现场应用证明,该测控系统具有运行稳定、方便快捷的特点,能够满足扭矩限制器的测试要求。
Abstract:
Torque limiter is a key component for overload protection in wind turbines, However, the testing of its slip torque, fatigue life and other performance has many shortcomings, such as complex flow, low automation and single function. In view of this, a measurement and control system for testing the performance of wind turbine torque limiter was designed. According to the functional requirements of the measurement and control system. Firstly, the hardware structure was designed, PLC was selected as the main control unit of the lower computer, and the industrial control computer was used as management and monitoring unit of the upper computer. Subsequently, the human-computer interface was designed by configuration software, and the PLC control program was written to realize the control and management of the measurement and control system. After field application, the measurement and control system h as the characteristics of stable operation, being convenient and fast, and can meet the test requirements of the torque limiter.

参考文献/References:

[ 1 ]   孙 一 琳 .2019 年 ,全 球 风 电 市 场 转 型 进 行 时 [ J ] . 风 能 ,2019 ( 4 ): 68- 70 .
[ 2 ]   白 润 东 ,黄 滔 .某 型 风 电 联 轴 器 的 力 矩 限 制 器 :拉 伤 解决 方 法 [ J ].东 方 汽 轮 机 ,2017(3):76-79 .
[ 3 ]   张 昊 祥 . 扭 矩 限 制 器 扭 矩 标 定 试 验 台 研 发 [ D ] . 湘 潭 :湘 潭 大 学 , 2017 .
[ 4 ]   朱 恒 杰 .PL C 在 温 控 系 统 中 的 应 用 [ J ] . 江 苏 科 技 信 息 ,2019 , 36 ( 6 ): 44- 46 .
[ 5 ]   熊 征 伟 .基 于M O D B U S 协 议 的 台 达 PL C 控 制 多 台 变频 器 应 用 研 究 [ J ].机 械 制 造 与 自 动 化 ,2019 , 48 ( 2 ):202- 205 .
[ 6 ]   李 慧 ,李 丽 . 采 摘 机 械 手 末 端 控 制 系 统 的 设 计 :基 于PL C 和 M C G S组 态 软 件 [ J ] . 农 机 化 研 究 , 2020 , 42( 6 ): 202-206 .
[ 7 ]   吴 学 娟 ,张 刚 . 基 于PL C 和 M C G S 的 变 频 恒 压 供 水 系统 的 设 计 [ J ] . 齐 齐 哈 尔 大 学 学 报 (自 然 科 学 版 ), 2015 ,31 ( 5 ): 33- 36 .
[ 8 ]   杨 德 君 . 浅 谈M C G S 组 态 软 件 的 权 限 设 定 [ J ] . 丝 路 视野 , 2016 ( 9 ): 73-74 .
[ 9 ]   白 银 ,邓 忠 . 基 于 三 菱PL C 的 流 量 PID 过 程 控 制 系 统的 设 计 [ J ] . 九 江 学 院 学 报 (自 然 科 学 版 ), 2018 , 33 ( 3 ):20- 22 .
[ 10 ]   李 尚 林 ,宋 文 强 . 基 于RS485 接 口 的 PL C 与 多 台 电 缸通 讯 的 实 现 及 运 用 [ J ] .装 备 制 造 技 术 ,2016 ( 5 ):229-230 ,233 .
[ 11 ]   何 旭 东 . 小 型 水 电 站 技 改 监 控 系 统 的 设 计 与 实 现[ D ] . 成 都 :电 子 科 技 大 学 , 2010 .

相似文献/References:

[1]宋 霄1,李钦奉1,耿莹晶2,等.兆瓦级风电高速联轴器设计与试验[J].机械与电子,2019,(08):55.
 ,,et al.Design and Test of High Speed Coupling for Megawatt Wind Power Group[J].Machinery & Electronics,2019,(10):55.
[2]刘怡伶,沈方岩,陈辛波.轮边电驱动试验台测控系统开发[J].机械与电子,2015,(11):59.
 LIU Yiling,SHEN Fangyan,CHEN Xinbo.Development of Measurement and Control System for Test Bench of Electric Wheel Drive System[J].Machinery & Electronics,2015,(10):59.

备注/Memo

备注/Memo:
收 稿 日 期 : 2020-06- 24
基 金 项 目 : 2020 年 江 苏 省 研 究 生 科 研 创 新 计 划 项 目 ( SJC X20 _ 0758 );南 京 海 关 科 研 项 目 ( 2019 KJ31 )
作 者 简 介 :王   智   ( 1996 - ),男 ,四 川 威 远 人 ,硕 士 研 究 生 ,研 究 方 向 为 智 能 传 感 器 ;赵 介 军( 1969 - ),男 ,江 苏 宜 兴 人 ,工 程 师 ,研 究 方向 为 机 电 产 品 检 测 技 术 ;俞 建 峰   ( 1974 - ),男 ,江 苏 宜 兴 人 ,教 授 ,研 究 方 向 为 工 业 互 联 与 智 能 传 感 ,通 信 作 者 。
更新日期/Last Update: 2020-09-28