[1]戴雨志,盛晓超,杨鹏程,等.齿面形状误差测量中干涉图像有效测量区域分割方法的对比研究[J].机械与电子,2021,(05):3-7.
　DAI Yuzhi,SHENG Xiaochao,YANG Pengcheng,et al.Comparison and Analysis of Effective Measurement Area Segmentation Methods in Tooth Surface Interference Fringe Pattern[J].Machinery & Electronics,2021,(05):3-7.
点击复制

齿面形状误差测量中干涉图像有效测量区域分割方法的对比研究()
分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2021年05期
页码:
3-7
栏目:
设计与研究
出版日期:
2021-05-24

文章信息/Info

Title:
Comparison and Analysis of Effective Measurement Area Segmentation Methods in Tooth Surface Interference Fringe Pattern
文章编号:
１００１-２２５７( ２０２１) ０５-０００３-０５
作者:
戴雨志1; 盛晓超1; 2; 杨鹏程1; 2; 朱新栋3
１．西安工程大学机电工程学院,陕西 西安 ７１０６００;
２．西安市现代智能纺织装备重点实验室,陕西 西安 ７１０６００;
３．西安交通大学机械制造系统工程国家重点实验室,陕西 西安 ７１００４９
Author(s):
DAI Yuzhi1; SHENG Xiaochao1; 2; YANG Pengcheng1; 2; ZHU Xindong3
(１．School of Mechanical and Electrical Engineering ,Xi’an Polytechnic University,Xi’an ７１０６００,China;
２．Xi’an Key Laboratory of Modern Intelligent Textile Equipment,Xi’an ７１０６００,China;
３．State Key Laboratory of Mechanical Manufacturing System Engineering ,Xi’an Jiaotong University,Xi’an ７１００４９, China)
关键词:
边界提取; 图像灰度; 干涉测量; 条纹图像
Keywords:
boundary extraction; image gray scale; interferometry;  stripe image
分类号:
TH１３２.４１; TP３９１.4
文献标志码:
A
摘要:
针对激光干涉法测量齿轮齿面形状误差时干涉图像中有效测量区域识别的问题,对几种经典的干涉图像分割算法进行了对比分析.首先,选取了相对调制度法、齿面物体像灰度法、同组干涉图共同过滤法这３种经典分割方法;其次,从理论上分析了各算法;然后,通过在渐开线圆柱斜齿轮的２组干涉图像中进行实验,将这３种方法应用于分割２组干涉图像的有效测量区域并对分割结果进行分析讨论;最后,明确了这３种方法的优缺点及适用情况,并给出了选取建议.
Abstract:
Aiming at the problem of identifying the effective measuring region in the interferogram when laser interferometry is used to measure the shape error of gear tooth surface,several classical interferogram segmentation algorithms are compared and analyzed．Firstly,three classical segmentation methods are selected,namely,the relative modulation method ,the gray-scale method of the tooth surface object image,and the common filtering method of the same set of interferograms．Secondly,each algorithm is analyzed theoretically．Then, through experiments in two groups of interference images of involute cylindrical helical gear,these three methods are applied to the segmentation of the effective measurement re-gion of the two groups of interference images and the segmentation results are analyzed and discussed．Finally,the advantages,disadvantages and application of these three methods are clarified,and the selection suggestions are given．

参考文献/References:

[１] 郭东明．高性能精密制造[J]．中国机械工程,２０１８,２９(７):７５７-７６５．

[２] 李圣怡,戴一帆．超精密加工机床新进展[J]．机械工程学报,２００３,３９(８):７-１４．
[３] HUNTLEY J M．Special issue on measurements of solid deformation by phase-shifting interferometry[J]．Optics and lasers inengineering,１９９６,２４(５/６):３６３-３６４．
[４] INO T,YATAGAI T．Oblique incidence interferometry for gear tooth surface profiling[J]．Proceedings of SPIE,１９９２,１７２０:４６４-４６９．
[５] YANG P C,FANG S P,WANG L J,et al．Correction method for segmenting valid measuring region of interference fringe patterns[J].Optical engineering,2011,50(9):62-65.
[６] 覃金昌,樊庆文,王德麾,等．一种能够同时提取图像强弱边 界的局部极值算法[J]．机械与电子,２００７(１０):７２-７４．[７] FANG S P,WANG L J,YANG P C,et al．Object-image-based method to construct an unweighted quality map for phase extraction and phase unwrapping [J]．Applied optics,２０１１,５０(１０):１４８２-１４８７．
[８] FANG S P,WANG L J ,LIU S Q,et al．Positioning the actual interference fringe pattern on the tooth flank in measuring gear tooth flanks by laser interferometry[J]．Optical engineering,２０１１,５０(５):０５５６０１
[９] 王爱民,沈兰荪．图像分割研究综述[J]．测控技术,２０００,１９(５):１-６,１６．
[１０] 章毓晋.图像分割评价技术分类与比较[J]中国图象图形学报１９９６,１(２):１５１-１５８．
[１１] VROOMAN H A,MAASA A．Image processing algorithms for the analysis of phase shifted speckle interference patterns[J]．Applied optics,１９９１,３０(１３):１６３６- １６４１．
[１２] REID G T．Automatic fringe pattern analysis:a review[J]．Optics and lasers inengineering ,１９８６,７(１):３７-６８．

备注/Memo

备注/Memo:
收稿日期:２０２０-１１-１１
基金项目:国家自然科学基金资助项目(５１９０５４１２);陕西省教育厅２０２０年度自然科学一般专项科学研究计划(２０JK０６４４);大学生创新创业项目(S２０１９１０７０９０３３)
作者简介:戴雨志(１９９５－),男,江苏徐州人,硕士,研究方向为基于激光干涉测量的图像处理算法;盛晓超(１９８７－),男,河南许昌人,博士,讲师,研究方向为基于激光干涉的多自由度系统位置检测、高速高精度运动控制技术等,通信作者.
更新日期/Last Update: 2021-05-25