[1]李莉芳.区域性 CT 设备质量控制的节能运行优化方法[J].机械与电子,2021,(09):28-31.
 LI Lifang.Optimization Method for Energy Saving Operation of Regional CT Equipment Quality Control[J].Machinery & Electronics,2021,(09):28-31.
点击复制

区域性 CT 设备质量控制的节能运行优化方法()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2021年09期
页码:
28-31
栏目:
机电一体化技术
出版日期:
2021-09-24

文章信息/Info

Title:
Optimization Method for Energy Saving Operation of Regional CT Equipment Quality Control
文章编号:
1001-2257 ( 2021 ) 09-0028-04
作者:
李莉芳
深圳市康宁医院设备办,广东 深圳 518000
Author(s):
LI Lifang
( Equipment Office of Shenzhen Kangning Hospital ,
关键词:
CT 设备质量控制节能运行
Keywords:
CT equipment quality control energy saving operation
分类号:
TH774
文献标志码:
A
摘要:
为减少区域性 CT 设备工作中的能耗,设计一种区域性 CT 设备质量控制节能运行优化方法.首先采用度日法对负荷能量值进行计算,并根据计算结果优化能量参数,在此基础上,设计节能优化目标;然后建立电量与设备质量控制的函数关系,预测消耗的电量;最后采用遗传算法优化节能参数,实现区域性 CT 设备质量控制节能运行优化.实验结果表明,采用此次研究方法优化后,能有效减少设备的运行成本与发生故障的情况,并提高设备工作的实时性.
Abstract:
In order to reduce the energy consumption in the work of regional CT equipment , a method of energy saving operation optimization for quality control design of regional CT equipment is designed.Firstly , the load energy value is calculated by the method of degrees,and the energy parameters are optimized according to the calculation results.On this basis , the energy saving optimization objective is designed.Then the function relationship between the electric quantity and the equipment quality control is established to predict the consumption of electricity.Finally , the energy saving parameters are optimized by genetic algorithm to realize the energy saving operation optimization of regional CT equipment quality control design.The experimental results show that the optimization method can reduce the cost of equipment and the failure of the equipment , and improve the real-time performance of the equipment.

参考文献/References:

[1] 王莉,杨淑杰,谭运择,等 . 国产与国际主流 CT 设备胸部平扫影像质量与辐射剂量的比较[ J ] . 中华医学杂志,2020 , 100 ( 15 ): 1148-1153.

[2] 梁国栋,胡佳琦,马健,等 . 基于含镥探测器的 PET / CT 无源日常质量控制技术的实验验证与分析[ J ] . 中华核医学与分子影像杂志,2020 , 40 ( 6 ): 368-369.
[3] 曾维俊,王钟周,王骏,等 . 大视场相位衬度 CT 转台轻量化设计[ J ] . 机床与液压, 2019 , 47 ( 17 ): 162-166 , 172.
[4] 郭玮 . 重视 ctDNA 检测的分析前质量控制[ J ] . 中华检验医学杂志,2020 , 43 ( 2 ): 120-123.
[5] 竺方辉,华寅飞,方晖,等 . 地铁环境与设备监控系统节能控制的设计与实现[ J ] . 城市轨道交通研究, 2020 , 23( 10 ): 46-49.
[6] 杨文正,谭锐,蒋国安 . 凝汽器抽真空设备节能量的试验测评方法的修正[ J ] . 热能动力工程, 2020 , 35 ( 11 ):46-51.
[7] 王清洲,孙超,马小江,等 . 两类沥青混合料拌和设备的节能减排量化分析[ J ] . 公路, 2020 , 65 ( 11 ): 340-346.
[8] 李爱艳,曲鲁滨,李英 . 大型船舶内部制冷设备节能技术研究[ J ] . 舰船科学技术, 2019 , 41 ( 16 ): 217-219.
[9] 梁海洲,张少明,周名侦 . 船舶变频制冷设备节能方法研究[ J ] . 舰船科学技术, 2019 , 41 ( 8 ): 55-57.
[10] 陶学宗,张秀芝,陈继红 . 港口集装箱作业设备改造的节能减排效益评估[ J ] . 气候变化研究进展, 2019 , 15( 2 ): 197-205.
[11] 刘春国,曹端山,闫伟成 . 纺织厂空调节能的实践[ J ] .棉纺织技术,2019 , 47 ( 2 ): 45-47.
[12] 于华中,李娟,成璐瑶,等 . 移动式医疗废水强化消毒预处理 设 备 的 工 艺 设 计 [ J ] . 水 处 理 技 术, 2020 ,46( 9 ): 11-14.
[13] 赵婉芳,韩勇 . 基于调度器的物联网设备能耗优化策略[ J ] . 电信科学, 2019 , 35 ( 3 ): 84-90.
[14] 杜娟丽,李国瑞 . 机场地面桥载设备节能分析[ J ] . 暖通空调,2019 , 49 ( 11 ): 106-112.

备注/Memo

备注/Memo:
收稿日期: 2021-06-07
作者简介:李莉芳 ( 1973- ),女,广东深圳人,工程师,研究方向为医疗设备管理、电子设备控制.
更新日期/Last Update: 2021-09-28