[1]刘明会,张滨娜.空调电机启动控制设备变形量激光检测方法[J].机械与电子,2021,(12):30-33.
 LIU Minghui,ZHANG Binna.Laser Detection Method for Deformation of Air Conditioning Motor Starting Control Equipment[J].Machinery & Electronics,2021,(12):30-33.
点击复制

空调电机启动控制设备变形量激光检测方法()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2021年12期
页码:
30-33
栏目:
机电一体化技术
出版日期:
2021-12-28

文章信息/Info

Title:
Laser Detection Method for Deformation of Air Conditioning Motor Starting Control Equipment
文章编号:
1001-2257 ( 2021 ) 12-0030-04
作者:
刘明会张滨娜
吉林大学中日联谊医院南湖院区,吉林 长春 130012
Author(s):
LIU Minghui ZHANG Binna
( Nanhu Branch , China-Japan Union Hospital of Jilin University , Changchun 130012 , China )
关键词:
空调电机启动控制设备变形量激光检测 MNF
Keywords:
air conditioning motor start control equipment deformation laser detection MNF
分类号:
TN247
文献标志码:
A
摘要:
提出一种基于 MNF 的空调电机启动控制设备变形量激光检测方法。首先,利用激光扫描技术获得空调电机启动控制设备的具体变形位置,利用改进的最小噪声分离变换( MNF )方法,估计噪声信息并通过差分计算进行降维处理;然后,利用激光检测技术确定空调电机启动控制设备在低维噪声图像中的变形程度;最后,进行仿真实验测试。仿真结果表明,所提方法能够有效降低虚警率以及漏检率。
Abstract:
A laser detection method based on MNF for deformation of air conditioning motor starting control equipment is proposed.Firstly , laser scanning technology is used to obtain the specific deformation position of air conditioningmotor starting control equipment.The improved minimum noise separation transform ( MNF ) method is used to estimate the noise information and reduce the dimension by differential calculation.Then , the deformation degree of the air conditioning motor starting control equipment in the low dimensional noise image is determined by using the laser detection technology.Finally , the simulation results show that the proposed method can effectively reduce the false alarm rate and miss detection rate.

参考文献/References:

[ 1 ] 宋建国,张斌,谢敏波 . 改进的车载空调压缩机无位置传感器控制起动方法[ J ] . 电机与控制应用,2019 , 46( 12 ): 40-46.

[ 2 ] 陈洪芳,孙衍强,王亚韦,等 . 高精度激光追踪测量方法及实验研究[ J ] . 中国激光, 2018 , 45 ( 1 ): 166-173.
[ 3 ] 朱建杰,郑雨昊,曹营修,等 . 基于激光三角法的管状物内轮廓测量方法[ J ] . 中国测试, 2018 , 44 ( 4 ): 86-90.
[ 4 ] 张弓,臧朝平,李繁,等 . 薄壁圆筒结构工作变形的连续扫描激光测振方法[ J ] . 航空动力学报,2020 , 35 ( 5 ):938-943.
[ 5 ] 尤相骏,成俊 . 一种真圆型隧道激光扫描断面变形检测新方法的研究[ J ] . 隧道建设, 2017 , 37 ( 7 ): 794-802.
[ 6 ] 祁志江,张柱柱,焦光伟,等 . 基于三维激光扫描技术的油罐变形检测方法[ J ] . 油气储运, 2018 , 37 ( 1 ): 74-79.
[ 7 ] 付苗苗,沈红伟 . 激光测距无损检测机器人电机转矩控制[ J ] . 激光杂志, 2020 , 41 ( 10 ): 121-124.
[ 8 ] 王文清,田柏林,冯海明,等 . 基于激光测距矿用带式输送机多参数检测方法研究[ J ] . 煤炭科学技术, 2020 , 48( 8 ): 131-138.
[ 9 ] 胡备,郑立评,徐润东 . 一种火炮身管内径测量算法的优化方法[ J ] . 火炮发射与控制学报, 2020 , 41 ( 2 ): 73-76 , 86.
[ 10 ] 王贤宇,方欣,李陶 . 基于卡尔曼模糊自适应 PID 的激光雷达斩光频率控制方法[ J ] . 量子电子学报, 2018 , 35 ( 5 ): 608-617.
[ 11 ] 杨静,谢海椿,邢宗义 . 基于激光位移传感器的便携式轮对测量仪[ J ] . 仪表技术与传感器, 2017 ( 4 ): 41-44.
[ 12 ] 任福汉,余红英,刘琛 . 激光雷达中扫描振镜控制研究[ J ] . 微特电机, 2019 , 47 ( 11 ): 60-64.
[ 13 ] 石佳俊,郑义军,谭荣清,等 .PI 参数优化实现 CO 2 激光快速选线稳定输出[ J ] . 红外与激光工程, 2019 , 48( 10 ): 57-63.
[ 14 ] 李志军,陈伟根,季焱,等 . 基于分布反馈激光器双波长调制的微量气体测量方法[ J ] . 激光与光电子学进展,2017 , 54 ( 11 ): 226-231.
[ 15 ] 庞增拴,李欣 . 基于图像处理的伺服系统精度测量方法及装置[ J ] . 电子设计工程, 2018 , 26 ( 9 ): 167-171.
[ 16 ] 邓晓隆,田石柱 . 基于三维激光扫描的桥梁变形检测及数据处理[ J ] . 激光与光电子学进展, 2018 , 55 ( 7 ):286-291.
[ 17 ] 齐淑生,潘为民,衡红星 . 大型空腔定子叶片热处理变形的数字化测量及评定[ J ] . 河南科技大学学报(自然科学版),2020 , 41 ( 4 ): 19-26.
[ 18 ] 李晓江 . 小型无人机起落架柔性变形缓冲控制方法仿真[ J ] . 计算机仿真, 2020 , 37 ( 11 ): 23-26 , 70.

备注/Memo

备注/Memo:
收稿日期: 2021-07-16
作者简介:刘明会 ( 1971- ),男,吉林长春人,工程硕士,高级工程师,研究方向为暖通空调领域自动化控制;张滨娜 ( 1978- ),女,吉林长春人,硕士,助理研究员,研究方向为暖通空调领域自动化控制,通信作者。
更新日期/Last Update: 2021-12-28