[1]王栋.基于偏差校正的汽车安全气囊系统自动校准方法[J].机械与电子,2022,(01):59-62.
　WANG Dong.Automatic Calibration Method of Automobile Airbag System Based on Deviation Correction[J].Machinery & Electronics,2022,(01):59-62.
点击复制

基于偏差校正的汽车安全气囊系统自动校准方法()

分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

Title:: Automatic Calibration Method of Automobile Airbag System Based on Deviation Correction

Author(s):: WANG Dong; (Industrial Metrology Center of Shanghai Motor Vehicle Testing and Certification Technology Research Center Co. , Ltd. , Shanghai 201805 , China )

Keywords:: deviation correction ; automobile airbag system ; automatic calibration ; safety warning light ; toe in wheel

摘要:: 为了提高汽车安全性能,强化安全气囊对乘员保护作用,提出一种基于偏差校正的汽车安全气囊系统自动校准方法。以安全警示灯出现闪烁次数为依据,读取故障代码,诊断汽车安全气囊系统状态,根据诊断结果进行外部故障校准,调整前束尺寸,获取线路校准有效距离;在此基础上,将汽车碰撞安全性作为头部损伤评价指标,衡量出不同时间段内,汽车加速度与乘员头部位移距离,确定汽车安全气囊系统的具体点火时刻,设定移动窗式积分法与 ARMA 模型预报法校准不同环境下安全气囊系统的点火时刻,完成内部校准,通过系统外部和内部校准实现汽车安全气囊系统自动校准。实验证明,该自动校准方法能够精确得出汽车的加速度与乘员头部位移,校准结果有效。

Abstract:: In order to improve the safety performance of automobiles and strengthen the protective effect of airbags on users , an automatic calibration method for automobile airbag systems based on deviation correction is proposed.Based on the number of flashes of the safety warning light , the fault code is read , the state of the car?s airbag system is diagnosed , the external faults are calibrated according to the diagnosis result , the toe size is adjusted so as to obtain the effective distance of the line calibration.On this basis , the vehicle collision safety is taken as the evaluation index of head injury , and the vehicle acceleration and occupant head displacement distance in different time periods are measured to determine the specific ignition time of automobile airbag system.The moving window integral method and the ARMA model prediction method were set to calibrate under different environments.The internal calibration is completed at the ignition moment of the airbag system , and the auto airbag system is automatically calibrated through the external and internal calibration of the system.Experiments have proved that the proposed method can accurately obtain the acceleration of the car and the displacement of the occupant ’ s head , and the calibration result is valid.

[ 1 ] 韩志伟,李良,徐娜 . 城市轨道交通运营维护管理信息系统中的设备管理故障代码体系研究[ J ] . 城市轨道交通研究,2019 , 22 ( 1 ): 65-68.

[ 2 ] 何方,罗志雄,杨艳妮,等 . 考虑回路因素的电动汽车最短路问题研究[ J ] . 交通运输系统工程与信息, 2020 , 20( 2 ): 181-187.

[ 3 ] 劳俊,谢伟忠,刘梦岩,等 . 轮荷转移条件下前束值对操纵稳定性的影响分析[ J ] . 汽车技术, 2020 ( 12 ): 43-48.

[ 4 ] 唐飞,杜子学 . 基于降低悬挂式单轨车辆侧滚的结构参数优化研究[ J ] . 城市轨道交通研究, 2019 , 22 ( 3 ): 36-40.

[ 5 ] 葛如海,顾瑶芝,蔡朝阳,等 . 正面碰撞前后双气室气囊的设计与优化[ J ] . 汽车工程, 2019 , 41 ( 4 ): 411-416.

[ 6 ] 陈武争,陈大鹏,陈力,等 . 汽车安全气囊爆炸威力的确定方法[ J ] . 振动与冲击, 2020 , 39 ( 2 ): 163-168.

[ 7 ] 洪彬,纪娅,吕顺雅,等 . 汽车点火线圈用环氧胶的电老化规律研究[ J ] . 热固性树脂, 2019 , 34 ( 3 ): 47-50.

[ 8 ] 陆颖,周庄,李仲兴,等 . 车辆碰撞事故后乘员伤情影响因素研究 [ J ] . 机械设计与制造,2019 ( 10 ): 266-268 , 272.

[ 9 ] 潘海鸿,贺飞翔,易健,等 . 正矢曲线加减速加加加速度连续算法研究 [ J ] . 机械科学与技术,2019 , 38 ( 12 ):1894-1903.

[ 10 ] 杨晓荣,任颖,姜宏阔,等 . 城市轨道交通车辆重联运行的车载信号系统控制方案[ J ] . 机车电传动,2019( 6 ): 126-127 , 133.

[ 11 ] 谭永宏,曾喆昭 . 基于弹性能量函数的非线性不确定系统控制方法 [ J ] . 控制与决策, 2019 , 34 ( 6 ):1247-1252.

[ 12 ] 姜平,鲍娣,夏梁,等 . 基于组合近似模型的汽车结构耐撞性优化设计[ J ] . 合肥工业大学学报(自然科学版),2020 , 43 ( 4 ): 443-449.

更新日期/Last Update: 2022-03-01