[1]彭录海.谐波干扰下数字化高压电能计量装置误差预补偿方法[J].机械与电子,2022,(02):29-33.
　PENG Luhai.Error Pre-compensation Method of Digital High Voltage Electric Energy Metering Deviceunder Harmonic Interference[J].Machinery & Electronics,2022,(02):29-33.
点击复制

谐波干扰下数字化高压电能计量装置误差预补偿方法()

分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

Title:: Error Pre-compensation Method of Digital High Voltage Electric Energy Metering Deviceunder Harmonic Interference

Author(s):: PENG Luhai; ( State Grid Harbin Power Supply Company , Harbin 150010 , China )

Keywords:: harmonic interference ; digital electric energy metering device ; error pre-compensation ; zero-crossing detection ; sampling frequency

摘要:: 为了降低预补偿计量装置的误差,提升电能计量精度,提出了谐波干扰下数字化高压电能计量装置误差预补偿方法。分析谐波干扰下计量装置的误差,并计算谐波干扰下标准采样频率时的功率值;利用过零检测算法计算实际采样频率,获取实际采样频率时的功率值,标准采样频率时的功率值与实际采样频率时的功率值之差即为预补偿功率值,实现电能计量装置误差预补偿。实验结果表明:该方法可精准计算不同谐波次数时电能计量装置的三相功率误差;该方法补偿后的功率值与功率理论值差距较小,具备较优的功率误差预补偿效果;应用该方法后的计量装置报表数据记录精度更高。

Abstract:: In order to reduce the error of pre-compensation metering device and improve the accuracy of electric energy metering , an error pre-compensation method of digital high-voltage electric energy metering device under harmonic interference is proposed.The error of metering device under harmonic interference is analyzed , and the power value at standard sampling frequency under harmonic interference is calculated ; the zero-crossing detection algorithm is used to calculate the actual sampling frequency and obtain the power value at the actual sampling frequency ; the difference between the power value at the standard sampling frequency and the power value at the actual sampling frequency is the pre-compensated power value which can realize the error pre-compensation of the electric energy metering device.The experimental results show that this method can accurately calculate the three-phase power error of electric energy metering device under different harmonic times.The difference between the compensated power value and the theoretical power value is small , and the method has better power error pre-compensation effect.After using this method , the report data recording accuracy of the metering device is higher.

[ 1 ] 郭红霞,王振华,荆臻,等 . 基于 BP 神经网络的高压电能计量装置误差校正研究[ J ] . 电网与清洁能源, 2020 ,36 ( 6 ): 25-30.

[ 2 ] 罗群,刘春雨,王月明,等 . 计及谐波信号和温度变化的智能电能表计量误差分析方法[ J ] . 中国测试, 2019 , 45( 7 ): 117-121 , 139.

[ 3 ] 李国胜,郑雪 . 畸变信号下船舶电能计量装置全自动校验系统设计[ J ] . 舰船科学技术, 2019 , 41 ( 22 ): 100-102.

[ 4 ] 方正武,许中璞,王学伟,等 . 自动化检定流水线环境下射频信号对智能电能表误差的影响分析[ J ] . 电测与仪表,2020 , 57 ( 9 ): 140-145.

[ 5 ] 闫文吉,陈红亮,陈洪敏,等 . 硅压阻式压力传感器测量误差在线补偿方法研究[ J ] . 仪器仪表学报,2020 , 41( 6 ): 59-65.

[ 6 ] 郑方燕,颜路,汤其富,等 . 基于遗传算法的时栅误差参数辨识与补偿方法研究[ J ] . 传感技术学报,2019 , 32( 10 ): 1527-1534.

[ 7 ] 陈昊,乔亚男,刘婧,等 . 考虑模型病态性的智能电表运行误差分析方法[ J ] . 电力建设, 2020 , 41 ( 2 ): 94-100.

[ 8 ] 王学伟,王艳君,王磊,等 . 基于随机过程平均功率的量化误差影响分析[ J ] . 电力自动化设备,2018 , 38 ( 7 ):182-188.

[ 9 ] 孙世政,周清松,何泽银 . 嵌入式时栅角位移传感器短周期误差分析与补偿[ J ] . 仪器仪表学报, 2019 , 40 ( 4 ):27-34.

[ 10 ] 于春平,白静芬,周建波,等 . 基于 IEC61850 的数字化电能计量二次设备远程校验技术[ J ] . 电测与仪表,2019 , 56 ( 4 ): 135-141.

[ 11 ] 魏伟,唐登平,李帆,等 . 数字化电能表较电子式电能表计量及检测差异性研究[ J ] . 电测与仪表, 2020 , 57( 23 ): 126-134.

[ 12 ] 孔祥玉,马玉莹,李野,等 . 基于限定记忆递推最小二乘算法的智能电表运行误差远程估计[ J ] . 中国电机工程学报,2020 , 40 ( 7 ): 2143-2151 , 2394.

[ 13 ] 许柳,吕智林,孟泽晨,等 . 非线性负载下的多变流器谐波电压补偿控制策略[ J ] . 电力系统保护与控制,2019 , 47 ( 7 ): 1-11.

[ 14 ] 焦宁,刘天琪,王顺亮,等 . 三相两电平逆变器死区效应谐波分析及其补偿方法研究[ J ] . 电网技术, 2020 ,44 ( 6 ): 2169-2176.

[ 15 ] 王勇,刘正春,尹志勇,等 . 抗频率波动的有源电力滤波器谐波补偿控制方法 [ J ] . 高电压技术,2019 , 45( 10 ):3890-3899.

备注/Memo:: 收稿日期: 2021-09-08
作者简介:彭录海 ( 1970- ),男,辽宁宽甸人,硕士,高级工程师,研究方向为电能计量、电力工程、电动汽车充换电设施以及综合能源等。

更新日期/Last Update: 2022-03-03