[1]王超,鲁效平,刘伦明,等.基于 CPS 的可重构制造系统在互联工厂的应用[J].机械与电子,2022,(09):22-26.
　WANG Chao,LU Xiaoping,LIU Lunming,et al.Application of Reconfigurable Manufacturing System Based on CPS in Interconnected Factories[J].Machinery & Electronics,2022,(09):22-26.
点击复制

基于 CPS 的可重构制造系统在互联工厂的应用()

分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

Title:: Application of Reconfigurable Manufacturing System Based on CPS in Interconnected Factories

Author(s):: WANG Chao ; LU Xiaoping ; LIU Lunming ; SUN Ming ; JING Dazhi ; WANG Yumei; ( COSMO Industrial Intelligence Research Institute( Qingdao ) Co. , Ltd. , Qingdao 266500 , China )

Keywords:: reconfigurable manufacturing system ; interconnected factory ; CPS ; modularization

摘要:: 为了解决个性化定制与大规模生产的矛盾,应用 CPS 技术和模块化制造单元,建立了完整的可重构制造系统,实现大规模个性化定制产品生产流程的高效协同。在研究了面向大规模个性化定制可重构系统特性的基础上,构建了基于 CPS 的可重构制造系统架构,研究了可重构系统的关键核心技术。建立的系统可以将生产制造的复杂行为转换为实际数据信息,通过重构分析、智能决策和动态优化调整模块化制造单元,使整个生产环节的制造资源处于有序可控状态。通过在互联工厂展开应用落地验证,结果表明了该系统的可行性和有效性。

Abstract:: In order to solve the contradiction between personalized customization and mass production , a complete reconfigurable manufacturing system was established by using CPS technology and modular manufacturing unit to realize the efficient cooperation of mass personalized customization product production process.Based on the study of the characteristics of reconfigurable system for mass customization , the architecture of reconfigurable manufacturing system based on CPS was constructed , and the key core technologies of reconfigurable system were studied.The established system converted the complex behavior of production and manufacturing into actual data information , and made the manufacturing resources in the whole production link in an orderly and controllable state through reconfiguration analysis , intelligent decision-making and dynamic optimization and adjustment of modular manufacturing units.Finally , the feasibility and effectiveness of the system were verified by the application in the interconnected factory.

[ 1 ] 李洪阳,魏慕恒,黄洁,等 . 信息物理系统技术综述[ J ] .自动化学报,2019 , 45 ( 1 ): 37-50.

[ 2 ] 苑明海,李东波,于敏建 . 面向大规模定制的可重构生产线及其关键技术[ J ] . 机床与液压, 2007 ( 4 ): 77-80.

[ 3 ] 戴亦舒,叶丽莎,董小英,等 .CPS 与未来制造业的发展:中德美政策与能力构建的比较研究[ J ] . 中国软科学,2018 ( 2 ): 11-20

[ 4 ] 陈友玲,刘文科,严键 . 基于 RMC 的可重构制造系统设备布局优化研究 [ J ] . 计算机应用研究,2011 , 28( 12 ): 4550-4553 , 4571.

[ 5 ] 田云龙,肖志余 . 工业 4.0 下的信息物理系统( CPS )的构建[ J ] . 现代工业经济和信息化,2018 , 8 ( 14 ): 3-4 , 11.

[ 6 ] 徐立云,郭昆吾,刘伟,等 . 基于可重构制造系统生产能力扩展过程的工艺重构[ J ] . 计算机集成制造系统,2015 , 21 ( 6 ): 1460-1468.

[ 7 ] 王国新,黄思翰,商曦文,等 . 考虑加工功能和加工能力的可重构制造系统重构点决策方法[ J ] . 计算机集成制造系统,2016 , 22 ( 9 ): 2135-2144.

[ 8 ] 贺鹏,于家城,王庆林 . 基于多 Agent的可重构制造系统集成模型[ J ] . 计算机工程与应用, 2008 ( 21 ): 231-234.

[ 9 ] 朋学琴,陈友玲 . 可重构复杂制造系统的设施布置优化方法[ J ] . 工业工程与管理, 2010 , 15 ( 4 ): 74-78.

[ 10 ] 赵中敏 . 可重构制造系统及关键技术分析[ J ] .CAD / CAM 与制造业信息化, 2007 ( 10 ): 24-26.

[ 11 ] 易湘斌,朱佳梦,赵鹏飞 . 可重构制造系统及其若干关键技术研究[ J ] . 现代制造工程, 2007 ( 7 ): 56-58.

[ 12 ] 房殿军,黄哲昱 . 面向可重构混流生产线的设施布局与生产调度并行优化方法[ J ] . 物流技术, 2019 ,38( 7 ): 117-122.

[ 13 ] 王长梅,李晓舟 . 模块化的可重构制造系统研究[ J ] .机械与电子,2014 ( 8 ): 38-40.

备注/Memo:: 收稿日期: 2022-03-07
基金项目:山东省重点研发计划( 2020CXGC010103 )
作者简介:王超 ( 1986- ),男,山东菏泽人,博士,高级工程师,研究方向为智能制造、工业互联网及钢铁轧制技术;鲁效平 ( 1981- ),男,山东泰安人,博士,高级工程师,研究方向为智能制造、工业互联网以及新能源机械机电控制,通信作者。

更新日期/Last Update: 2022-10-25