[1]邹长星,邓春丽,袁 森.导弹发射箱发射过程热流固耦合数值模拟[J].机械与电子,2022,(07):22-26.
　ZOU Changxing,DENG Chunli,YUAN Sen,et al.Numerical?Simulation of Thermal Fluid Solid Coupling of Launch Box[J].Machinery & Electronics,2022,(07):22-26.
点击复制

导弹发射箱发射过程热流固耦合数值模拟()
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2022年07期
页码:
22-26
栏目:
设计与研究
出版日期:
2022-07-28

文章信息/Info

Title:
Numerical?Simulation of Thermal Fluid Solid Coupling of Launch Box
文章编号:
1001-2257 ( 2022 ) 07-0022-05
作者:
邹长星 1 ; 邓春丽 2 ; 袁 森 1 ; 2
1. 贵州理工学院机械工程学院,贵州 贵阳 550003 ; 2. 贵州大学机械工程学院,贵州 贵阳 550025
Author(s):
ZOU Changxing1 ;  DENG Chunli2 ;  YUAN Sen1 ;  2
(1.College of Mechanical Engineering , Guizhou Institute of Technology , Guiyang 550003 , China ; 2.School of Mechanical Engineering , Guizhou University , Guiyang 550025 , China )
关键词:
发射箱; 应力; 变形; 域动分层法; 热流固耦合技术
Keywords:
launch box ;  stress ;  deformation ;  domain dynamic division method ;  thermo-fluid solid coupling
分类号:
TJ768.2
文献标志码:
A
摘要:
为研究导弹热发射过程中发射箱结构应力与变形分布规律,建立了发射箱内流场域、外流场域和结构域 1 / 4 对称模型。采用域动分层法和单向热流固耦合技术模拟导弹发射,得到发射箱内外壁的压强、温度变化。仿真结果表明:导弹发射过程中,由于高温高压燃气流的烧蚀和冲击,在发射 0.020 0 s 时刻发射箱前端加强筋处应力最大,为 7 209.10 MPa ;在发射 0.020 0 s 时刻发射箱前端处变形最大,为 27.24 mm 。该仿真验证为箱体结构优化设计与制造提供了数据支持及理论依据。
Abstract:
In order to study the distribution law of the structural stress and deformation of the launch box in the process of missile thermal launch , 1 / 4 coupling model of internal flow field, outflow field and structural domain of the launch box were established.The domain dynamic division method and the thermo fluid solid coupling technology were used to simulate the missile launch and obtain the temperature and pressure changes of inner and outer wall of the launch box.The simulation results show that : the largest stress and the most deformation respectively occurred at front stiffener and front of the launching box , both at 0.020 0 s , with 7 209.10 MPa and 27.24 mm independently , during the process of missile launching due to the ablation and impact of high temperature and high pressure gas flow.The simulation verification provides data support and theoretical basis for the optimal design and manufacture of box structure.

参考文献/References:

[ 1 ] 高明坤,宋廷伦 . 火箭导弹发射装置构造[ M ] . 北京:北京理工大学出版社,1996.

[ 2 ] 郑亚,陈军,鞠玉涛 . 固体火箭发动机传热学[ M ] . 北京:北京航空航天大学出版社,2006.
[ 3 ] 蔺翠郎,毕世华 . 同心筒发射装置导弹燃气流热效应数值模拟[ J ] . 弹箭与制导学报, 2008 , 28 ( 3 ): 193-195.
[ 4 ] 郭敬彬,程栋,刘涛,等 . 发射筒热力耦合场下力学性能研究[ J ] . 舰船科学技术, 2018 , 40 ( 11 ): 148-151.
[ 5 ] 张义浦,张志春,赵秀影 . 基于 FLUENT 的飞机机翼积冰的数值模拟[ J ] . 科学技术与工程,2017 , 17 ( 20 ):302-307.
[ 6 ] 靖建全,傅德彬,王新星,等 . 易碎盖开启过程流场计算与分析[ J ] . 弹箭与制报, 2016 , 36 ( 4 ): 80-82.?
[ 7 ] 牛钰森,姜毅,史少岩,等 . 与燃气射流耦合的易裂后盖开启过程数值分析 [ J ] . 兵工学报, 2015 , 36 ( 1 ):87-93.
[ 8 ] 王启凡,余陵,洪松,等 . 典型固体火箭发动机流热固耦合数值模拟[ J ] . 弹箭与制导学报,2019 , 39 ( 2 ): 11-14 , 19.
[ 9 ] 张俊,高天宇,高璞清,等 . 固体火箭发动机工作末期的内流场数值计算[ J ] . 弹箭与制导学报 2018 ,38 ( 3 ):58-62.
[ 10 ] 姜毅,史少岩,牛钰森,等 . 发射气体动力学[ M ] . 北京:北京理工大学出版社,2015.

相似文献/References:

[1]张言中,黄晓华,田继涛,等.航空材料切削加工切屑的形成及其数值的模拟[J].机械与电子,2019,(10):41.
　,,et al.Formation of Chips in Aeronautical Material Cutting and Simulation of Its Numerical Value[J].Machinery & Electronics,2019,(07):41.
[2]罗思源,兀光波,王延琦,等.某运输包装件的跌落冲击仿真分析[J].机械与电子,2016,(08):16.
　LUO Siyuan,WU Guangbo,WANG Yanqi,et al.Drop Impact Simulation Analysis for a Transport Package[J].Machinery & Electronics,2016,(07):16.
[3]钱巨林,葛新峰,祝双桔,等.不同螺栓预紧力的水轮机顶盖及螺栓的静应力分析[J].机械与电子,2021,(02):12.
　QIAN Julin,GE Xinfeng,ZHU Shuangju,et al.Static Stress Analysis of Top Cover and Connecting Bolts on Kaplan Turbine under Different Bolts Preload[J].Machinery & Electronics,2021,(07):12.

备注/Memo

备注/Memo:
收稿日期: 2022-03-17
作者简介:邹长星 ( 1983- ),男,贵州安顺人,硕士,高级工程师,研究方向为先进制造技术、燃气射流动力学。
更新日期/Last Update: 2022-08-24