[1]朱颉,张伟,李文建,等.基于 M2M 的就地 FA 通信测试系统设计[J].机械与电子,2022,(09):37-40.
　ZHU Jie,ZHANG Wei,LI Wenjian,et al.Design of Local FA Communication Test System Based on M2M[J].Machinery & Electronics,2022,(09):37-40.
点击复制

基于 M2M 的就地 FA 通信测试系统设计()

分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

Author(s):: ZHU Jie ; ZHANG Wei ; LI Wenjian ; ZHANG Huanqiao ; WANG Chao; ( Stated Grid Zhengzhou Power Company , Zhengzhou 450052 , China )

Keywords:: local feeder automation terminal ; communication test ; M2M ; DNP3 protocol

摘要:: 针对就地 FA 测试不准确等问题,提出了基于 M2M 的 FA 通信测试系统。对就地馈线自动化系统的通信原理和通信模式进行了分析。分析了智能电网发展对馈线自动化系统的具体要求和馈线自动化系统通信网络的主要功能结构。阐述了集中控制架构、去中心控制架构和分布式控制架构的特点,说明分布式控制架构的优势。对馈线自动化通信测试体系提出了具体的结构要求,并对就地馈线自动化系统通信,提出了机器对机器的通信方式,说明了 DNP3 协议的原理和组织架构。根据所提出的通信方式,说明了通信机制,搭建了仿真测试平台,以单向接地故障为例,说明了馈线自动化系统通信的有效性。

Abstract:: Aiming at the problems of inaccurate FA test on site , an M2M-based FA communication test system is proposed.The communication principle and communication mode of the local feeder automation system are analyzed.The specific requirements of the development of smart grid for feeder automation system and the main functional structure of the feeder automation system communication network are analyzed.The characteristics of centralized control architecture , decentralized control architecture , and the distributed control architecture are explained , and the specific advantages of distributed control architecture are illustrated.The specific structural requirements are proposed for the feeder automation communication test system , the machine-to-machine communication method is proposed for the local feeder automation system communication , and the specific principles and organizational structure of the DNP3 protocol are explained.For the communication method proposed in this paper , the specific communication mechanism is explained , a simulation test platform is built , and a one-way ground fault is taken as an example to illustrate the effectiveness of the feeder automation system communication.

[ 1 ] 梁子龙,李晓悦,邹荣庆,等 . 基于 5G 通信智能分布式馈线自动化应用[ J ] . 电力系统保护与控制,2021 , 49( 7 ): 24-30.

[ 2 ] 张明明,秦平,陈永进,等 . 考虑通信失效下集中就地模式切换的低压馈线自动化研究[ J ] . 机电工程技术,2020 , 49 ( 11 ): 76-78.

[ 3 ] 陈绍辉 . 基于对等式通信智能分布式配电网自愈技术研究[ J ] . 云南电力技术, 2020 , 48 ( 4 ): 12-15.

[ 4 ] 胡迅,彭道刚,张浩,等 . 基于 IEC 61850 的智能馈线自动化通信技术研究[ J ] . 电力科学与技术学报, 2017 , 32( 4 ): 108-114.

[ 5 ] 张明,朱国防,嵇文路,等 . 基于通信质量检测的自适应分布式智能馈线自动化[ J ] . 南方电网技术,2017 , 11( 11 ): 61-67.

[ 6 ] 刘彬,李盼 . 基于无线通信和图像识别的馈线自动化现场自动测试[ J ] . 无线电通信技术, 2018 , 44 ( 2 ): 202-206.

备注/Memo:: 收稿日期: 2022-04-22
作者简介:朱颉 ( 1980- ),男,河南偃师人,学士,高级工程师,研究方向为电网规划及管理;张伟 ( 1986- ),男,河南信阳人,学士,高级工程师,研究方向为电网规划及管理。

更新日期/Last Update: 2022-10-25