[1]张德浩,陈蔚芳,于凤杰,等.基于BP神经网络的破碎机主轴系统参数优化[J].机械与电子,2016,(01):55-59.
　ZHANG Dehao,CHEN Weifang,YU Fengjie,et al.Study of Optimization Method for Parameters of the Crusher Spindle System Based on BP Neural Network[J].Machinery & Electronics,2016,(01):55-59.
点击复制

基于BP神经网络的破碎机主轴系统参数优化
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2016年01期
页码:
55-59
栏目:
自动控制与检测
出版日期:
2016-01-25

文章信息/Info

Title:
Study of Optimization Method for Parameters of the Crusher Spindle System Based on BP Neural Network
文章编号:
1001-2257(2016)01-0055-05
作者:
张德浩; 陈蔚芳; 于凤杰; 叶文华
(南京航空航天大学机电学院,江苏 南京 210016)
Author(s):
ZHANG Dehao;  CHEN Weifang;  YU Fengjie;  YE Wenhua
(College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
关键词:
破碎机;  主轴系统;  正交试验法;  BP神经网络
Keywords:
crusher;  spindle system;  orthogonal test;  BP neural network
分类号:
TH122
文献标志码:
A
摘要:
为了优化破碎机主轴系统的主要工作和结构参数,采用离散变量型正交试验法得到部分参数水平组合,并利用有限元分析软件ANSYS进行分析,得到在这些组合下主轴系统各个性能指数,应用层次分析法和综合评价法得到了主轴系统的综合性能指数,用以上数据训练反向传播(BP)神经网络,并利用完成训练的BP神经网络,预测在其余参数水平组合下的主轴综合性能数指数。根据主轴系统性能指标,优选出利于提高破碎机主轴系统的综合性能的结构和工作参数水平组合,实现废金属破碎机主轴系统参数优化。
Abstract:
To optimize spindle system's main working and structural parameters, this paper uses the orthogonal test with discrete variables to obtain part of the combinations of the spindle system's parameters. According to the analysis results of ANSYS the finite element analysis tool, each performance index of spindle system based on the previous combination is obtained. After each performance index is gained, the synthetic performance of crusher spindle system is also obtained with the analytic hierarchy process and comprehensive evaluation method. Then a BP(Back Propagation)neural network is trained based on the above data, which is able to predict the synthetic performance under the rest part of the combinations of working and structural parameters. Upon the synthetic performance, the combination of working and structural parameters is obtained, which is most beneficial to improving the performance, realizing the optimization of the crusher spindle system's parameters.

参考文献/References:

[1] Russo P, Aboussouan L, Birat J P, et al. Mechanical and metallurgical study of the fragmentation of end-of-life goods in a scrap shredder[J]. International Journal of Mineral Processing, 2004, 74:395-403.
[2] Lewinski J, Mazela A. Experimental analysis of impact comminution phenomena in a model impact crusher[J]. Aufbereit Tech,1984, 25(10):580-584.
[3] Wang Y, Chen E, Gao J Q, et al. Joint modeling and simulation of the spindle system of hammer crusher based on finite element analysis and flexible multi-body dynamics[J].Advanced Materials Research,2012,630:297-301.
[4] 任小中,陈新建,苏建新. 锤式破碎机转子主要技术参数的确定[J]. 煤矿机械,2008,29(2):26-28.
[5] 姚进,施宁平,董军辉.反击锤式破碎机的优化设计[J].建筑机械,2002(7):33-35.
[6] LI H, CAO J C, LU J T, et al. Monte Carlo simulation of extraction barrier width effects on terahertz quantum cascade lasers[J]. Applied Physics Letters, 2008, 92(22):221105-221105-3.
[7] 王德明,王 莉, 张广明.基于遗传BP 神经网络的短期风速预测模型[J]. 浙江大学学报(工学版),2012,46(5):837-841.
[8] 范高锋,王伟胜,刘纯,等.基于人工神经网络的风电功率预测[J].中国电机工程学报,2008,28(34):118-123.
[9] 翟颖妮,孙树栋,王军强,等. 基于正交试验的作业车间瓶颈识别方法[J]. 计算机集成制造系统,2010,16(9):1945-1952.
[10] 师义民,徐伟,秦超英,等. 数理统计[M ]. 北京:科学出版社,2009.
[11] 彭安华,杨刚刚.基于层次分析法的二级模糊综合评判在机构选型中的应用[J].工程设计学报,2007,14(4):278-281.
[12] Chang N B,Chen H W,Ning S K.Identification of river water quality using the fuzzy synthetic evaluation approach [J].Journal of Environmental Management, 2001, 63(3):293-305.
[13] 史峰,王小川,郁磊,等. MATLAB神经网络30个案例分析[M]. 北京:北京航空航天大学出版社,2011.

备注/Memo

备注/Memo:
收稿日期:2015-10-21
基金项目:江苏省科技计划项目(BE2012753)
作者简介:张德浩(1990-),男,江苏徐州人,硕士研究生,研究方向为现代集成制造; 陈蔚芳(1966-),女,江苏无锡人,教授,博士研究生导师,研究方向为工艺设计与优化、数控技术、现代集成制造等; 于凤杰(1991-),女,安徽阜阳人,硕士研究生,研究方向为现代集成制造; 叶文华(1965-),男,浙江余姚人,教授,博士研究生导师,研究方向为CIMS,FMS,CAPP,PDM和ERP等。
更新日期/Last Update: 2016-01-25