[1]魏延辉,陈巍,杨子扬,等.基于构形平面的水下机械臂运动学求解方法[J].机械与电子,2016,(03):3-8.
 WEI Yanhui,CHEN Wei,YANG Ziyang,et al.Kinematics Solution Approach for Underwater Manipulator Based on Configuration Plane[J].Machinery & Electronics,2016,(03):3-8.
点击复制

基于构形平面的水下机械臂运动学求解方法
分享到:

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2016年03期
页码:
3-8
栏目:
设计与研究
出版日期:
2016-03-25

文章信息/Info

Title:
Kinematics Solution Approach for Underwater Manipulator Based on Configuration Plane
作者:
魏延辉陈巍杨子扬于园园韩寒
(哈尔滨工程大学自动化学院,黑龙江 哈尔滨 150001)
Author(s):
WEI YanhuiCHEN Wei YANG ZiyangYU YuanyuanHAN Han
(College of Automation, Harbin Engineering University,Harbin 150001,China)
关键词:
水下机械臂构形平面运动学建模逆运动学多角度连接模块
Keywords:
underwater manipulator configuration plane kinematics model inverse kinematics multi-angle connection module
分类号:
TP242.2
文献标志码:
A
摘要:
基于构形平面的运动学方法,推导出一种解决水下机械臂的运动学求解方法。首先研究了空间机械臂的常见空间关节形式,通过简化建立了统一形式的运动学表达形式。然后介绍了构形平面方法的基本原理和方法,并对构形中多角度连接模块进行了建模。对设计的水下机械臂进行简略介绍,建立其运动学模型,采用构形平面方法详细推导了水下机械臂的运动学求解过程,最后进行实例仿真,验证方法的有效性。
Abstract:
Based on the kinematics method of configuration plane, this paper proposes an approach to solve the kinematics problem of underwater manipulator. Firstly, the common joint forms of manipulator are studied and a unified expression form is established by simplification. Secondly, the basic principles and method of the configuration plane are introduced. Then the multi-angle connection module of the configuration is modeled. Thirdly, a brief introduction of the designed underwater manipulator is shown and its kinematics model is built as well. Then the detailed kinematics solution of underwater manipulator is derived by applying the configuration plane method. Finally, this approach is proved to be effective through the practical simulation experiment.

参考文献/References:

[1]徐玉如, 肖坤.智能海洋机器人技术进展[J]. 自动化学报,2007, 33(5): 518-521.
[2]朱心科,金翔龙,陶春辉,等.海洋探测技术与装备发展探讨[J].机器人,2013, 35(3): 376-384.
[3]Marani G,Choi S K, Yuh J.Underwater autonomous manipulation for intervention missions AUVs[J].Ocean Engineering, 2009, 36 (1): 15-23.
[4]Shim H, Jun B H, Lee P M, et al. Workspace control system of underwater tele-operated manipulators on an ROV[J]. Ocean Engineering, 2010,37(11/12):1036-1047.
[5]罗高生,陈家旺,顾临怡.基于双螺旋副传动的七功能液压机械手肘关节[J].机器人,2014,36(1):36-42.
[6]晏勇,马培荪,王道炎,等.深海 ROV 及其作业系统综述[J].机器人,2005,27(1):82-89.
[7]Farivarnejad H, Moosavian S A A.multiple impedance control for object manipulation by a dual arm underwater vehicle–manipulator system[J].Ocean Engineering, 2014, 89:82-98.
[8]Antonelli G,Caccavale F,Chiaverini S.Adaptive tracking control of underwater vehicle-manipulator systems based on the virtual decomposition approach[J]. IEEE Transactions on Robotics and Automation, 2004,20(3): 594-602.
[9]Soylu S,Buckham B J,Podhorodeski R P.Redundancy resolution for underwater mobile manipulators[J].Ocean Engineering,2010, 37(2/3):325-343.
[10]Wei Yanhui, Zhao Jie, Cai Hegao.Inverse kinematics research based on a new type of reconfigurable robot[J]. Journal of Xidian University, 2008,35(1):175-182.
[11]魏延辉,赵杰,蔡鹤皋.基于任务的可重构模块机器人构形确定方法[J].机械工程学报,2006,42(增刊):93-97.

相似文献/References:

[1]赵彦飞,田军委,裴 蕾,等.水下机械臂设计[J].机械与电子,2017,(06):77.
 ZHAO Yanfei,TIAN Junwei,PEI Lei,et al.Design of Underwater Manipulator[J].Machinery & Electronics,2017,(03):77.
[2]苏 宇,张 吉,王 沁.轻量级电驱水下机械臂设计与运动学分析[J].机械与电子,2020,(03):66.
 ,Design and Kinematic Analysis of a Lightweight Electric Drive Underwater Manipulator[J].Machinery & Electronics,2020,(03):66.
[3]樊 智 敏,哈 振 骞,薛 福 峰,等.水下机械臂运动空间分析与轨迹跟踪算法优化[J].机械与电子,2020,(06):67.
 ,,et al.Underwater Manipulator Motion Spatial Analysis and TrackingAlgorithm Optimization[J].Machinery & Electronics,2020,(03):67.

备注/Memo

备注/Memo:
收稿日期:2015-12-28
基金项目:国家自然科学基金(51205074);国家科学技术部国际科技合作项目(2014DFR10010);中央高校基本科研业务费(HEUCF041505); 高等学校博士学科点专项科研基金(20112304120007)
作者简介:魏延辉(1978-),男,黑龙江勃利人,工学博士,主要研究方向为可重构机器人。
更新日期/Last Update: 2016-03-25