[1]杨红芳,张 了.基于ANSYS的齿轮测量机机械部件的温度场分析[J].机械与电子,2015,(03):66-68.
　YANG Hongfang,ZHANG Liao.Temperature Field Analysis of the Mechanical Components of Gear-measuring Machine Based on ANSYS[J].Machinery & Electronics,2015,(03):66-68.
点击复制

基于ANSYS的齿轮测量机机械部件的温度场分析
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年03期
页码:
66-68
栏目:
自动控制与检测
出版日期:
2015-03-25

文章信息/Info

Title:
Temperature Field Analysis of the Mechanical Components of Gear-measuring Machine Based on ANSYS
文章编号:
1001-2257(2015)03-0066-03
作者:
杨红芳1; 张 了2
(1.西安工业大学工业中心,陕西 西安 710021; 2.陕西电力科学研究院,陕西 西安 710054)
Author(s):
YANG Hongfang1; ZHANG Liao2
(1.Industrial training center,Xi'an Technological University,Xi'an 710021,China; 2.Shaanxi Electric Power Research Institute, Xi'an 710054, China)
关键词:
齿轮测量机;  ANSYS;  环境温度;  温度场;  热分析
Keywords:
gear-measuring machine;  ANSYS;  environment temperature;  temperature field;  thermal analysis
分类号:
TH128
文献标志码:
A
摘要:
随着齿轮测量机在生产车间内逐步普及应用,对其精度的要求也越来越高。在众多影响因素中,车间内温度变化对仪器的影响不可忽视,这需要进一步分析整体仪器在不同环境温度下的温度场分布情况。阐述了利用Pro/E软件对齿轮测量机进行实体建模,再以IGS格式导入到ANSYS软件中,从而分析得出在环境温度为20 ℃～25 ℃齿轮测量机机械部件的温度分布,最终得到环境温度变化对测量精度的影响,为以后进一步分析热变形齿轮测量机几何精度的影响奠定了基础。
Abstract:
With the gradual popularization of gear-measuring machine in workshop,the requirement of accuracy are also getting higher and higher. Temperature variation in workshop, which factor affecting the accuracy of the instrument, can not be ignored. It needs further analysis of the temperature-field distribution of the machine under different ambient temperature. This paper explains how to establish the model of gear-measuring machine using Pro/E, and import it into ANSYS in IGS format. Thus it is concluded that how temperature distribute during 20 ℃～25 ℃ on the mechanical components of gear-measuring machine. Finally, it can be seen that effect of temperature on measuring accuracy intuitively. This paper laid a foundation for the further analysis influence of the thermal deformation gear measuring machine geometry precision.

参考文献/References:

[1] 费业泰.高精度测量中温度误差机理研究[C]//中国仪器仪表学会1991年学术年会论文集,1991.
[2] 费业泰,陈晓怀.论精密测试中温度误差的现代研究分析[J].仪器仪表学报,1993,14(4):369-374.
[3] 赵海峰,蒋迪.ANSYS8.0工程结构实例分析[M].北京:中国铁道出版社,2004.
[4] 刘坤,吴磊.ANSYS有限元方法精解[M].北京:国防工业出版社,2005.
[5] 倪栋,段进,徐久成.通用有限元分析ANSYS7.0实例精解[M].北京:电子工业出版社, 2003.
[6] 邹正刚.有限元分析中的材料性能单位[J].中国仿真科技论坛,2005(3):4-9.

相似文献/References:

[1]孟繁萃,张 达,赵洪博,等.干燥带对绝缘子温度场影响的研究[J].机械与电子,2018,(07):22.
　MENG Fancui,ZHANG Da,ZHAO Hongbo,et al.Research on Influence of Drying Zone on Insulator Temperature Field[J].Machinery & Electronics,2018,(03):22.
[2]华 燕,张发品,周 瑾.基于弹性支承的磁悬浮轴承转子系统振动控制[J].机械与电子,2015,(12):60.
　HUA Yan,ZHANG Fapin,ZHOU Jing.Vibration Control for Magnetic Bearing Rotor System Based on Elastic Support[J].Machinery & Electronics,2015,(03):60.
[3]赵静毅,张宏飞,吴文才,等.多自由度超声电机设计与应用研究[J].机械与电子,2015,(06):43.
　ZHAO Jingyi,ZHANG Hongfei,WU Wencai,et al.Research and Application of Multi-DOF Ultrasonic Motor[J].Machinery & Electronics,2015,(03):43.
[4]李来利,李 静.用于垂直面内电磁驱动的装置设计与仿真[J].机械与电子,2015,(07):11.
　LI Laili,LI Jing.Design and Simulation of an Apparatus for Electromagnetic Actuating in the Vertical Plane[J].Machinery & Electronics,2015,(03):11.

备注/Memo

备注/Memo:
收稿日期:2014-12-02
作者简介:杨红芳(1984-),女,山西天镇人,硕士,研究方向为机械。
更新日期/Last Update: 2015-03-25