[1]任亚军,赵 明.盾构机刀盘变频驱动控制系统研究[J].机械与电子,2015,(04):44-46.
　REN Yajun,ZHAO Ming.Research on Frequency Conversion Control of Tunnel Boring Machine's Cutter Head Driving System[J].Machinery & Electronics,2015,(04):44-46.
点击复制

盾构机刀盘变频驱动控制系统研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年04期
页码:
44-46
栏目:
机电一体化技术
出版日期:
2015-04-25

文章信息/Info

Title:
Research on Frequency Conversion Control of Tunnel Boring Machine's Cutter Head Driving System
文章编号:
1001-2257(2015)04-0044-03
作者:
任亚军1; 赵 明2
( 1.辽宁装备制造职业技术学院,辽宁 沈阳 110161; 2.北方重工集团盾构机分公司,辽宁 沈阳 110027 )
Author(s):
REN Yajun1; ZHAO Ming2
(1.Liaoning Equipment Manufacturing College,Shenyang 110161,China; 2.NHI Group TBM Company,Shenyang 110027,China)
关键词:
盾构机;  刀盘驱动;  变频器;  PLC
Keywords:
tunnel boring machine;  cutter head driving;  frequency converter;  PLC
分类号:
TP273
文献标志码:
A
摘要:
针对盾构机的刀盘驱动系统进行了全新的设计。系统选用8台西门子G130系列变频器,采用主从控制方式,重点解决多电机的同步运行问题,实现了多台电机之间的转矩平衡。8台变频器同时响应PLC的转速给定信号,每台变频器分别对各自的电机施加力矩,具备结构简单、运行稳定、电机力矩一致性好和易于维护等优势。在程序结构的设计上,采用了应用接口程序的编写方式,使程序核心部分相对稳定,又有灵活的扩展及操作能力。
Abstract:
In this paper,the new cutter head driving system of tunnel boring machine is designed. The system includes 8 sets of Siemens G130 series frequency converters,the master-slave control mode is used to solve the problem of multi motor synchronous operation and the torque balance between multiple motors is realized.The speed set of 8 frequency converters comes from the PLC at the same time,and the torque of each electric motor applied by the frequency converter.The system has the advantages of simple structure,stable operation,good agreement of motor torque and easy maintenance.The program,using the interface application,isdesigned,it can make the core part of the program stable,and it can also has the ability to expand and easy use.

参考文献/References:

[1] 吴启谊.海瑞克盾构机刀盘电液控制系统分析[J].流体传动与控制,2009(4):44-46.
[2] 蔡启仲,汤尧,吴玉鹏.盾构机刀盘变频驱动控制研究[J].广西工学院学报,2011,22(1):44-47.
[3] 史步海,李伟清.盾构机刀盘驱动系统同步控制技术研究[J].计算机测量与控制,2012,20(5):1258-1260.

相似文献/References:

[1]孙海力,吴恩启,闵 锐,等.盾构机盾尾变形检测与有限元分析[J].机械与电子,2022,(05):42.
　SUN Haili,WU Enqi,MIN Rui,et al.Deformation Detection and Finite Element Analysis of Tail of Shield Machine[J].Machinery & Electronics,2022,(04):42.

备注/Memo

备注/Memo:
收稿日期:2015-01-14
作者简介:任亚军(1983-),女,辽宁凌源人,讲师,研究方向为机电一体化技术; 赵 明(1983-),男,辽宁丹东人,工程师,研究方向为机电一体化技术、PLC控 制技术。
更新日期/Last Update: 2015-04-25