参考文献/References:
[1] 张文虎, 邓四二, 陈国定, 等. 圆柱滚子轴承半物理仿真 试 验 技 术 研 究 [J]. 机 械 工 程 学 报, 2018, 54(19) :78-87.
[2] 吴宝海, 梁满仓, 张莹, 等. 复杂曲面通道多轴加工的刀具选择方法 [J]. 机 械 工 程 学 报, 2018, 54(3) :117-124.
[3] GengL,Zhang Y F,FuhJ Y H. A neuralnetworkbasedapproachto5 axistool pathlengthestimationforoptimalmulti cutterselection[J]. ComputerAidedDesignandApplications,2011,8(2) :301-313
[4] DingX M,FuhJY H,LeeKS.Interferencedetectionfor3 axismoldmachining[J]. Computer AidedDesign,2001,33(8) :561-569.
[5] LasemiA,XueD,GuP. RecentdevelopmentinCNCmachiningoffreeformsurfaces:Astate of the artreview[J].Computer AidedDesign,2010,42(7):641-654.
[6] McgovernSM,GuptaS. 2 optheuristicforthedisassemblylinebalancingproblem[C]//ProceedingsofSPIE TheInternationalSocietyforOpticalEngineering,2003.
[7] AltekinT,KandillerL,OzdemirelN E. Profit orienteddisassembly linebalancing[J]. InternationalJournalofProductionResearch,2008,46(10) :2675-2693.
[8] 杨萍,刘晓玲,杨沛然. 载荷偏置对圆锥滚子润滑性能的影响[J]. 摩擦学学报,2012,32(3) :279-285.
[9] 李兴林,李俊卿,张仰平,等. 滚动轴承快速寿命试验现状及发展[J]. 轴承,2006(12) :44-47.
[10] 刘秀海,邓四二,滕弘飞. 高速圆柱滚子轴承保持架运动分析[J]. 航空发动机,2013,39(2) :31-38.
[11] 刘慧. 基于 ADAMS/Car汽车蛇行试验仿真[J]. 昆明理工大学学报(自然科学版) ,2011,36(2) :38-40.
[12] 谭文斌,张起鹏,李醒飞,等. θFXZ型测量机的回转轴线标 定 方 法 [J]. 机 械 科 学 与 技 术,2016,35(2) :285-289.
相似文献/References:
[1]祝德春,吴明.环境载荷下智能变电站预制舱结构强度有限元分析[J].机械与电子,2016,(10):30.
ZHU Dechun,WU Ming.Finite Element Analysis of Structural Strength of Precast Chamber for Smart Substation Under Environment Load[J].Machinery & Electronics,2016,(05):30.