[1]刘晓松.燃料组件修复系统工作平台轻量化设计[J].机械与电子,2018,(02):8-10.
　LIU Xiaosong.Lightweight Design of Work Platform of Fuel Assembly Repair System[J].Machinery & Electronics,2018,(02):8-10.
点击复制

燃料组件修复系统工作平台轻量化设计
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2018年02期
页码:
8-10
栏目:
设计与研究
出版日期:
2018-02-24

文章信息/Info

Title:
Lightweight Design of Work Platform of Fuel Assembly Repair System
文章编号:
1001-2257(2018)02-0008-03
作者:
刘晓松
(中国核动力研究设计院,四川 成都 610041)
Author(s):
LIU Xiaosong
(Nuclear Power Institute of China, Chengdu 610041, China)
关键词:
燃料组件修复;  线性加权法;  多目标拓扑优化;  轻量化
Keywords:
fuel assembly repair;  linear weighting method;  multi-objective topology optimization;  light weight
分类号:
TH112
文献标志码:
A
摘要:
为满足燃料组件修复系统的工作平台轻量化设计的要求,分别采用单目标柔度拓扑优化理论、单目标固有频率拓扑优化理论、多目标拓扑优化理论,对燃料组件修复系统的工作平台进行结构优化设计。优化结果表明,在重量减少一定的情况下,多目标拓扑优化能够获得动静态特性均优的工作平台。
Abstract:
Aiming at lightweight design for the work platform of fuel assembly repair system, this paper optimizes the structural design of the work platform for fuel assembly repair system by applying theories such as single objective flexibility topology optimization, single objective natural frequency topology optimization, and multi-objective topology optimization. The results show that in the case of a certain weight reduction, better dynamic and static performance of the work platform can be obtained by using multi-objective topology optimization.

参考文献/References:

[1] ERIK Holmberg,BO Torstenfelt, ANDERS Klarbring. Stress constrained topology optimization[J]. Struct Multidisc Optim,2013,48:33-47.
[2] 王万金,殷国富,胡 腾,等. 机床多截面拓扑优化方法研究[J]. 组合机床与自动化加工技术,2014(12):5-9.
[3] 王欣, 黄琳, 高媛, 等. 起重机伸缩臂截面拓扑优化[J].大连理工大学学报, 2009,49(3): 374-379.
[4] QIN Dongchen, ZHU Qiang. Structural topology optimization of box girder based on method of moving asymptotes[C]// 2010 International Conference on Intelligent Computation Technology and Automation, Changsha. IEEE, 2010:402-405.
[5] BENDSE M.Optimal shape design as a material distribution problem[J]. Struct Multidisc Optim,1989,1(4):193-202.
[6] 焦洪宇,周奇才,吴青龙,等.桥式起重机箱型主梁周期性拓扑优化设计[J].机械工程学报,2014,50(23):134-138.
[7] 邹春江,左孔天,向宇,等.基于SIMP方法微电容加速度计结构固有频率拓扑优化[J].科学技术与工程,2011,11(29):7086-7090.
[8] 谢俐, 杨乐.三平移全柔性并联机构多目标拓扑优化设计[J]. 机械设计与制造, 2017(9): 193-196.

备注/Memo

备注/Memo:
收稿日期:2017-11-20
基金项目:国家自然科学基金(51601185)
作者简介:刘晓松(1973-),男,四川成都人,硕士,副研究员,研究方向为核燃料及材料辐照检验技术。
更新日期/Last Update: 2018-02-24