[1]姜宏涛,何博侠,章亚非.采茶机械手嫩芽识别与定位方法研究[J].机械与电子,2021,(07):60-64.
　JIANG Hongtao,HE Boxia,ZHANG Yafei.Research on the Method of Recognizing and Positioning the Shoots of the Tea Picking Manipulator[J].Machinery & Electronics,2021,(07):60-64.
点击复制

采茶机械手嫩芽识别与定位方法研究()
分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2021年07期
页码:
60-64
栏目:
智能工程
出版日期:
2021-07-19

文章信息/Info

Title:
Research on the Method of Recognizing and Positioning the Shoots of the Tea Picking Manipulator
文章编号:
１００１-２２５７ ( ２０２１ ) ０７-００６０-０５
作者:
姜宏涛; 何博侠; 章亚非
南京理工大学机械工程学院,江苏 南京 ２１００９４
Author(s):
JIANG Hongtao ;  HE Boxia ;  ZHANG Yafei
( School of Mechanical Engineering , Nanjing University of Science and Technology , Nanjing ２１００９４ , China )
关键词:
机械手; 茶叶采摘; 分水岭算法; 视觉导引
Keywords:
manipulator ;  tea picking ;  watershed algorithm ;  visual guidance
分类号:
TP２４２ ; TP３９１. ４１
文献标志码:
A
摘要:
为实现采茶设备的选择性采摘,针对嫩芽的识别与定位方法进行研究.通过对比各种色彩因子组合,提取G-B分量对嫩芽图像进行灰度化处理,并在传统分水岭算法的基础上,引入BM３D去噪算法和灰度拉伸法对待分割嫩芽图像进行处理,分割出较完整的嫩芽图像.然后通过SURF算法进行特征点提取,结合RANSAC算法和极线约束去除误匹配点,在最小外接矩形法与双目测距原理的基础上完成茶叶采摘点的三维空间定位.最后通过采茶机械手进行定位实验,实验结果表明该方法基本满足采摘要求.
Abstract:
In order to realize the selective picking of tea picking equipment , the method of identifying and positioning the buds is studied． By comparing various color factor combinations , extracting G-B components to grayscale the bud image , and on the basis of the traditional watershed algorithm , using the BM３D denoising algorithm and grayscale stretching method to process the segmented bud image． Segment a more complete shoot image．Then use the SURF algorithm to extract the feature points , use the RANSAC algorithm and the epipolar constraint to remove the mismatched points , and combine the minimum bounding rectangle method and the binocular distance measurement principle to complete the three-dimensional location of the tea picking point． Finally , the positioning experiment was carried out by the tea picking manipulator , and the experimental results showed that the method basically met the picking requirements．

参考文献/References:

[１] 姚波,汪洋,李小瑞,等 ． 自然环境下嫩芽与茶梗自动分割方法的研究[ J ] ． 黑龙江八一农垦大学学报, ２０１７ , ２９( ２ ): １１４-１１７ , １２８.

[２] 张可,吕军 ． 自然条件下茶叶嫩芽图像分割方法的研究[ J ] ． 黑龙江八一农垦大学学报, ２０１６ , ２８ ( ２ ): １００-１０４．
[３] 周礼赞,方梦瑞,吕军 ． 低对比度茶叶嫩芽图像自动分割方法的研究[ J ] ． 蚕桑茶叶通讯, ２０１９ ( ２ ): ２２-２５．
[４] 黄海军,吴明晖,王先伟,等 ． 基于改进分水岭算法的茶叶嫩叶图像识别[ J ] ． 贵州农业科学, ２０１８ , ４６ ( ４ ): １３６-１３８．
[５] 袁加红,张中正,朱德泉,等 ． 名优绿茶嫩芽识别与定位方法研究[ J ] ． 安徽农业大学学报, ２０１６ , ４３ ( ５ ): ６７６-６８１．
[６] 唐仙,吴雪梅,张富贵 ． 基于阈值分割法的茶叶嫩芽识别研究[ J ] ． 农业装备技术, ２０１３ , ３９ ( ６ ): １０-１４．
[７] 方坤礼,廖建平,刘晓辉 ． 基于改进JSEG技术的茶叶图像嫩芽分割与识别研究[ J ] ． 食品工业, ２０１７ , ３８ ( ４ ):１３４-１３８．
[８] 王琨,刘大茂 ． 基于深度学习的茶叶状态智能识别方法[ J ] ． 重庆理工大学学报(自然科学版), ２０１５ , ２９ ( １２ ):１２０-１２６．
[９] 孙肖肖,牟少敏,许永玉,等 ． 基于深度学习的复杂背景下茶叶嫩芽检测算法[ J ] ．河北大学学报(自然科学版),２０１９ , ３９ ( ２ ): ２１１-２１６．
[１０] MAKINEN Y , AZZARI L , FOI A．Exact transform-domain noise variance for collaborative filtering of stationary correlated noise [ C ]// ２０１９IEEE International Conference on Image Processing．New York : IEEE , ２０１９ : １８５-１８９．

相似文献/References:

[1]伍晓媛,陈涛,易伟,等.油压机上下料机械手的设计与计算[J].机械与电子,2016,(04):73.
　WU Xiaoyuan,CHEN Tao,YI Wei,et al.Design and Calculation of Load/Unload Manipulator Used-on Hydraulic Press[J].Machinery & Electronics,2016,(07):73.
[2]李钦林.基于 Android 与 PLC 的采血管贴标系统的研制[J].机械与电子,2021,(10):37.
　LI Qinlin.Development of a Labeling System for Blood Collection Tubes Based on Android and PLC[J].Machinery & Electronics,2021,(07):37.
[3]雷利霞,马小荣,温晓荣.数控机床机械手柔性定位控制方法研究[J].机械与电子,2022,(10):45.
　LEI Lixia,MA Xiaorong,WEN Xiaorong.Research on Flexible Positioning Control Method of CNC Machine Tool Manipulator[J].Machinery & Electronics,2022,(07):45.
[4]曾国耀,曾国艺,肖小华.基于机械手搬运工件的生产线高效智能拣配系统[J].机械与电子,2023,41(09):37.
　ZENG Guoyao,ZENG Guoyi,XIAO Xiaohua.High Efficiency Intelligent Picking System for Production Line Based on Manipulator Handling Workpieces[J].Machinery & Electronics,2023,41(07):37.
[5]王 菊,管声启,李 杭,等.基于改进 BP 神经网络的机械手抓取力模糊 PID 控制[J].机械与电子,2024,42(12):25.
　WANG Ju,GUAN Shengqi,LI Hang,et al.Fuzzy PID Control of Grasping Force of Manipulator Based on Improved BP Neural Network[J].Machinery & Electronics,2024,42(07):25.

备注/Memo

备注/Memo:
收稿日期: ２０２１-０２-１７
基金项目:国家自然科学基金资助项目( ５１５７５２８１ );中央高校基本科研业务费专项资金资助项目(３０９１６０１１３０４)
作者简介:姜宏涛 ( １９９７－ ),男,湖南岳阳人,硕士研究生,研究方向为机器视觉;何博侠 ( １９７２－ ),男,甘肃西和人,博士,副教授,研究方向为机器视觉和工业人工智能等,通信作者;章亚非 ( １９９７－ ),男,安徽阜阳人,硕士研究生,研究方向为机器视觉.
更新日期/Last Update: 2021-07-19