[1]陈明东,许 涛,冯育龙,等.基于 ABAQUS 的角接触球轴承动力学仿真分析[J].机械与电子,2022,(03):35-39.
 CHEN Mingdong,XU Tao,FENG Yulong,et al.Dynamic Simulation Analysis of Angular Contact Ball Bearing Based on ABAQUS[J].Machinery & Electronics,2022,(03):35-39.
点击复制

基于 ABAQUS 的角接触球轴承动力学仿真分析()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2022年03期
页码:
35-39
栏目:
机电一体化技术
出版日期:
2022-03-25

文章信息/Info

Title:
Dynamic Simulation Analysis of Angular Contact Ball Bearing Based on ABAQUS
文章编号:
1001-2257 ( 2022 ) 03-0035-05
作者:
陈明东 1 许 涛 1 2 冯育龙 1 吕 欢 1 麻爱松 1
1. 西安工程大学机电工程学院,陕西 西安 710600 ; 2. 西安市现代智能纺织装备重点实验室,陕西 西安 710600
Author(s):
CHEN Mingdong1 XU Tao1 2 FENG Yulong1 LYU Huan1 MA Aisong1
(1.School of Mechanical and Electrical Engineering , Xi ’ an Polytechnic University , Xi ’ an 710600 , China ;2.Xi ’ an Key Laboratory of Modern Intelligent Textile Equipment , Xi ’ an 710600 , China )
关键词:
角接触球轴承有限元仿真温度场轴向位移径向位移
Keywords:
angular contact ball bearing finite element simulation temperature field axial displacement radial displacement
分类号:
TH133.33
文献标志码:
A
摘要:
为研究角接触球轴承在不同转速下温度及位移变化,基于 Palmgren 摩擦生热理论,综合考虑轴向载荷、切向摩擦和法向摩擦等边界条件,在 ABAQUS 软件中建立了轴承完全热力耦合模型。对轴承外圈施加固定的轴向载荷,并对内圈加载不同的转速,使用显示求解器求解轴承在不同转速下各部件温度和轴承内圈位移变化。仿真分析表明,该模型能够准确地反映轴承的温升以及轴承内圈位移情况,为轴承选取合适工作转速区间提供理论支撑。
Abstract:
In order to clarify the temperature and displacement changes of angular contact ball bearings at different rotational speeds , based on the Palmgren friction heat generation theory , a fully thermal mechanical finite element model which has considered boundary conditions such as axial load , tangential friction and normal friction was established in ABAQUS software.The bearing outer ring is applied to a fixed axial load , and the inner ring is loaded with different speeds.The temperature of each component of the bearing and displacement of the inner ring will be carried out by using the Explicit solver.The simulation analysis shows that the model can accurately reflect the temperature rise of the bearing and the displacement of the bearing inner ring.This conclusion provides theoretical support for selecting the appropriate working speed range of the bearing.

参考文献/References:

[ 1 ] 徐宏海,蒋兴佳,姜久林 . 高铁轴箱测温孔与轴承部件温度场仿真分析 [ J ] . 计算机仿真, 2021 ,38 ( 1 ): 134-137 , 192.

[ 2 ] WANG L W , SHENG X Y , LUO J B.Thermal mechanical fully coupled analysis of high-speed angular contact ball bearings [ J ] .Journal of mechanical science and technology , 2021 , 35 : 669-678.
[ 3 ] 李振峰,沈锦龙,季佳伟,等 . 高速角接触球轴承稳态温度场的数值模拟及实验研究[ J ] . 润滑与密封, 2021 , 46( 1 ): 45-50.
[ 4 ] ZHENG D X , CHEN W F , LI M M.An optimized thermal network model to estimate thermal performances on a pair of angular contact ball bearings under oil-air lubrication [ J ] .Applied thermal engineering ,2018 , 131 : 328-339.
[ 5 ] ZHENG D X , CHEN W F.Thermal performances on angular contact ball bearing of high-speed spindle considering structural constraints under oil-air lubrication [ J ] .Tribology international , 2017 , 109 :593-601.
[ 6 ] YAN K , HONG J , ZHANG J H , et al.Thermal-deformation coupling in thermal network for transient analysis of spindle-bearing system [ J ] .International journal of thermal sciences , 2016 , 104 : 1-12.
[ 7 ] 王兰文,盛选禹,雒建斌 . 高速角接触球轴承热特性和机械特性研究[ J ] . 机械设计, 2021 , 38 ( 1 ): 1-7.
[ 8 ] WANG H T , CAI Y L , WANG H.A dynamic thermal mechanical model of the spindle-bearing system [ J ] . Mechanical sciences , 2017 , 8 ( 2 ): 277-288.
[ 9 ] YE Z H , WANG L Q , CHEN G C , et al.Analysis of thermo-mechanical coupling of high speed angular contact ball bearings [ J ] .Advances in mechanical engineering , 2017 , 9 ( 6 ): 1 14.
[ 10 ] MA C , MEI X S , YANG J , et al.Thermal characteristics analysis and experimental study on the high speed spindle system [ J ] .International journal of advanced manufacturing technology , 2015 , 79 ( 1/ 2 / 3 /4 ): 469-489.
[ 11 ] CHRISTIAN B , SHNEOR Y , NEUS S , et al.Thermal behavior of externally driven spindle : experimental study and modelling [ J ] .Engineering , 2015 , 7( 2 ): 73-92.
[ 12 ] LI H Q , SHIN Y C.Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model [ J ] .International journal of machine tools and manufacture ,2004 , 44 ( 4 ): 347-364.

相似文献/References:

[1]聂 周,王 超,张云环,等.角接触球轴承启动过程动力学特性分析[J].机械与电子,2018,(04):24.
 NIE Zhou,WANG Chao,ZHANG Yunhuan,et al.Dynamics Analysis of Start-up Process of Angular Contact Ball Bearing[J].Machinery & Electronics,2018,(03):24.
[2]郑夕健,陈 超.20m 大跨度升降工作平台作业平台振动力学性能分析[J].机械与电子,2019,(12):20.
 .Research on Working Platform’s Vibration Mechanical Propertiesof 20m Large Span Lifting Work Platform[J].Machinery & Electronics,2019,(03):20.
[3]闫 轩,许 涛,曾柄杰.基于旋滚比的电主轴轴承预紧力优化研究[J].机械与电子,2020,(12):14.
 YAN Xuan,XU Tao,ZEN Bingjie.Optimization Research on Pre-tightening Force of Electric Spindle Bearing Based on Spin--roll Ratio[J].Machinery & Electronics,2020,(03):14.
[4]翁程琳,贾 山,赵建华,等.星表着陆缓冲装置缩比样机全工况落震试验系统设计与试验方法开发[J].机械与电子,2021,(02):8.
 WENG Chenglin,JIA Shan,ZHAO Jianhua,et al.Design and Test Method Development of a Overall-condition Drop Test System for Scale Prototype of Planetary-surface Soft Lander[J].Machinery & Electronics,2021,(03):8.
[5]王振炬,管恩广,刘积昊,等.基于磁隙式吸附机构的槽车清洗机器人[J].机械与电子,2021,(02):65.
 WANG Zhenju,GUAN Enguang,LIU Jihao,et al.Tank Car Cleaning Robot Based on Magnetic Gap Adsorption Mechanism[J].Machinery & Electronics,2021,(03):65.
[6]孙海力,吴恩启,闵 锐,等.盾构机盾尾变形检测与有限元分析[J].机械与电子,2022,(05):42.
 SUN Haili,WU Enqi,MIN Rui,et al.Deformation Detection and Finite Element Analysis of Tail of Shield Machine[J].Machinery & Electronics,2022,(03):42.
[7]宋恒东,韩学春,陈 轩,等.污秽与串偏斜对劣化绝缘子空间电场的影响研究[J].机械与电子,2023,41(09):8.
 SONG Hengdong,HAN Xuechun,CHEN Xuan,et al.Influence Research of Pollution and String Deflection on the Space Electric Field of Deteriorated Insulators[J].Machinery & Electronics,2023,41(03):8.
[8]孙天圣,刘芳华,江 来,等.基于 Halbach 阵列的爬壁机器人永磁吸附模块优化设计[J].机械与电子,2023,41(10):54.
 SUN Tiansheng,LIU Fanghua,JIANG Lai,et al.Optimal Design of Permanent Magnet Adsorption Module Based on Halbach Array for Wall-climbing Robot[J].Machinery & Electronics,2023,41(03):54.
[9]李 旭,刘 胜.三腔道软体驱动器弯曲预测方法的研究[J].机械与电子,2023,41(12):10.
 LI Xu,LIU Sheng.Research on Bending Prediction Method of Three-chamber Soft Actuator[J].Machinery & Electronics,2023,41(03):10.
[10]张 昊,阙妙玲,李静雯.基于建筑变形监测的高性能压力传感器的仿真研究[J].机械与电子,2024,42(02):3.
 ZHANG Hao,QUE Miaoling,LI Jingwen.Simulation Study of High-performance Pressure Sensor Based on Building Deformation Monitoring[J].Machinery & Electronics,2024,42(03):3.

备注/Memo

备注/Memo:
收稿日期: 2021-10-19
基金项目:陕西省自然科学基金( 2019JM-310 );西安市现代智能纺织装备重点实验室( 2019220614SYS021CG043 )
作者简介:陈明东 ( 1996- ),男,湖北黄冈人,硕士研究生,研究方向为轴承 转子系统有限元仿真;许 涛 ( 1983- ),男,陕西咸阳人,副教授,研究方向为高速电主轴动态性能控制;冯育龙 ( 1996- ),男,河南洛阳人,硕士研究生,研究方向为高速电磁阀仿真;吕 欢 ( 1997- ),男,安徽桐城人,硕士研究生,研究方向为滚动轴承故障诊断;麻爱松 ( 1996- ),男,山东烟台人,硕士研究生,研究方向为机器视觉、目标检测。
更新日期/Last Update: 2022-03-23