[1]赵 凯,朱全松.高效高精度火工品压药控制技术[J].机械与电子,2015,(11):29-31.
　ZHAO Kai,ZHU Quansong.High Efficiency and High Precision Control Technology for Initiating Explosive Device Powder Pressing[J].Machinery & Electronics,2015,(11):29-31.
点击复制

高效高精度火工品压药控制技术
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年11期
页码:
29-31
栏目:
设计与研究
出版日期:
2015-11-25

文章信息/Info

Title:
High Efficiency and High Precision Control Technology for Initiating Explosive Device Powder Pressing
文章编号:
1001-2257(2015)11-0029-03
作者:
赵 凯; 朱全松
(西南自动化研究所弹药自动装药研究应用中心,四川 绵阳 621000)
Author(s):
ZHAO Kai; ZHU Quansong
(Ammunition Center, Southwest Automation Research Institute,Mianyang 621000,China)
关键词:
PID控制;  自动压药;  压药压力控制
Keywords:
PID control;  automatic powder press;  powder-pressing pressure control
分类号:
TJ45
文献标志码:
A
摘要:
针对传统压药控制技术中电气比例阀对气液增力缸冲压力控制的不稳定和精度不高的问题,提出了改进方法。在传统压药工艺控制系统基础上,通过软件PID控制算法,实现高精度压药控制,并通过改进PID控制方式,可克服PID控制过程中稳定周期过长的缺点,从而实现压药控制的稳定性和高效率。
Abstract:
Aiming at low stability and low-precision of control pneumatic hydraulic cylinder by the proportional pressure valve for traditional powder pressing technology, this paper proposes a method of improvement. Based on traditional powder pressing control system, high-precision powder pressing pressure control was achieved by PID control algorithms. By improving PID control mode, resolving the problem of the stable period being too long during the PID control so that high stability and efficiency of powder pressing control can be achieved.

参考文献/References:

[1] 夏建才,刘丽梅.火工品制造[M].北京:北京理工大学出版社,2009.
[2] 郑连清,刘荣,王钰,等.火工品压药工艺方法的改进[J].火工品,1999(1):5-7.
[3] 聂坤亮,朱全松,蒋波,等.火工品生产自动化的影响因素[J].兵工自动化,2014,33(2):84-86.
[4] 樊学良,赵凤岐,向方容,等.气液增力技术在火工品生产中的应用[J].四川兵工学报,2006(5):45-47.
[5] 西门子(中国)有限公司自动化与驱动集团.深入浅出西门子S7-200 PLC[M].北京:北京航空航天大学出版社,2003.

相似文献/References:

[1]王正义,陈庆樟,王康,等.基于BUCK电路与PID的复合电源功率控制研究[J].机械与电子,2019,(03):68.
　WANG Zhengyi,CHEN Qingzhang,WANG Kang,et al.Research on Power Control of Compound Power Supply Based on BUCK Circuit and PID[J].Machinery & Electronics,2019,(11):68.
[2]李怀政,刘美红,陈启愉,等.基于扰动观测器的SCARA机器人运动误差补偿控制设计与仿真[J].机械与电子,2016,(09):73.
　LI Huaizheng,LIU Meihong,CHEN Qiyu,et al.Control Design and Simulation of SCARA Robot’s Motion Error Compensation Based on Disturbance Observer[J].Machinery & Electronics,2016,(11):73.
[3]史国宝１,宋天麟２,金达锋３.电机驱动的 ＡＢＳ／ＴＣＳ的建模仿真[J].机械与电子,2019,(12):33.
　,Modeling and Simulation Based on Motor Driven ABS/TCS[J].Machinery & Electronics,2019,(11):33.
[4]刘 鹏,罗福源,孙凌云.硅锭电火花线切割对称式张力控制研究[J].机械与电子,2021,(04):53.
　LIU Peng,LUO Fuyuan,SUN Lingyun.Research on Symmetrical Tension Control of Silicon Ingot Wire EDM[J].Machinery & Electronics,2021,(11):53.

备注/Memo

备注/Memo:
收稿日期:2015-09-08
基金项目:国防基础科研项目(C1020110001)
作者简介:赵 凯(1963-),女,黑龙江人,硕士研究生,高级工程师,主要从事自动控制方面研究。
更新日期/Last Update: 2019-11-25