[1]闫莉莉,张云鹤,方静,等.碳纤维增强铝基复合材料裂纹图像检测[J].机械与电子,2017,(08):36-40.[doi:1001-2257(2017)08-0036-05]
　YAN Lili,ZHANG Yunhe,FANG Jing,et al.The Interlaminar Crack Image Detection of the Carbon Fiber Reforced Aluminum Matrix Composites[J].Machinery & Electronics,2017,(08):36-40.[doi:1001-2257(2017)08-0036-05]
点击复制

碳纤维增强铝基复合材料裂纹图像检测
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2017年08期
页码:
36-40
栏目:
自动控制与检测
出版日期:
2017-08-25

文章信息/Info

Title:
The Interlaminar Crack Image Detection of the Carbon Fiber Reforced Aluminum Matrix Composites
作者:
闫莉莉; 张云鹤; 方静; 李克新
(东北林业大学机电工程学院, 黑龙江 哈尔滨 150040)
Author(s):
YAN Lili;  ZHANG Yunhe;  FANG Jing;  LI Kexin
(Northeast Forestry University College of Mechanical and Electrical Engineering, Harbin 150040,China)
关键词:
图像处理;  碳纤维增强铝基复合材料;  层间裂纹;  裂纹检测
Keywords:
image processing;  Cf/Al composite material;  interlaminar crack;  crack detection
分类号:
TP317.4
DOI:
1001-2257(2017)08-0036-05
文献标志码:
A
摘要:
根据检测目标的特点,提出了适用于本文的以下4种改进的图像处理算法:图像二值化、区域生长、数学形态学算法、骨架提取算法。利用上述图像处理算法相结合的方式对由SEM(扫描电镜)采集到的微观裂纹图像进行处理,提取并计算出裂纹长度和宽度,将计算值与测量值进行比较,验证方法的准确性。此方法为碳纤维增强铝基复合材料裂纹的裂纹图像检测提供了一种新途径。
Abstract:
Based on the characteristics of the detecting target, four improved image processing algorithms are presented as follows: image binarization, region growing, mathematical morphology algorithm, and skeleton extraction algorithm. The micro crack image collected by SEM was firstly processed by means of the aforementioned image processing algorithms to extract and calculate the length and the width of the crack; Then, the accuracy of the method was validated by comparing the calculated results and the measured results. The method provides a new way to process the crack image of the carbon fiber reinforced aluminum matrix composites. s: image processing; carbon fiber reinforced aluminum matrix composites; interlaminar crack; crack detection

参考文献/References:

[1]胡舵.复合材料界面裂纹扩展机理的数值模拟研究[D]. 南昌:南昌大学,2013.
[2]彭惠芬,夏晔,王鹏,等.复合材料层合结构层间应力分析[J].河北工业科技,2015,32(2):139-142[3]蔡忠云.含脱层损伤复合材料层合梁动力特性的理论与实验研究[D]. 上海:上海交通大学,2009.
[4]张璐.含分层缺陷复合材料层合板分层扩展行为与数值模拟研究[D]. 哈尔滨:哈尔滨工业大学,2012.
[5]冯波,王晓洁,惠雪梅.复合材料z-pin增强技术研究现状[J].玻璃钢/复合材料,2012(2):82-85.
[6]LUO Z H, ZHU Z D, RUAN H N, et al. Extraction of microcracks in rock images based on heuristic graph searching and application[J]. Computers & Geosciences,2015(85):22-35.
[7]LIU M F, LIU Y, HU H J, et al. Genetic algorithm and mathematical morphology based binarization method for strip steel defect image with non-uniform illumination[J]. Journal of Visual Communication and Image Representation,2015(37):70-77.
[8]张琪. 结合边缘检测的图像二值化算法[D]. 长春:吉林大学,2011.
[9]梁丹. 基于视觉注意机制及区域生长的图像分割方法研究[D]. 杭州:浙江大学,2013.
[10]刘鑫. 基于复合材料缺陷检测中的红外图像分割技术研究[D]. 天津:中国民航大学,2015.
[11]黄志良. 基于数字图像处理的高温钢坯裂纹检测研究[D]. 成都:电子科技大学,2013.
[12]李不言. 图像二值化方法对比分析[J]. 印刷杂志,2012(10):48-50.
[13]雷煜卿. 图像识别中骨架提取及描述方法相关研究[D]. 北京:华北电力大学,2009.

相似文献/References:

[1]宋孟华１,曹金龙２,鲍成伟１. 基于图像处理的嵌入式火焰检测系统[J].机械与电子,2019,(01):58.
　, Embedded Flame Detection System Based on Image Processing[J].Machinery & Electronics,2019,(08):58.
[2]刘朝涛,于彪.基于Arduino的桥梁检测设备的研发[J].机械与电子,2016,(08):76.
　LIU Chaotao,YU Biao.Research and Development of a Bridge Detection Equipment based on Arduino[J].Machinery & Electronics,2016,(08):76.
[3]张小洁,段峻.改进的Hough变换在零件圆心定位中的应用[J].机械与电子,2016,(10):62.
　ZHANG Xiaojie,DUAN Jun.Application of Improved Hough Transforming in Parts Center Positioning[J].Machinery & Electronics,2016,(08):62.
[4]陈 红,胡恩才,白静静.交叉路口信号灯智能管理系统设计[J].机械与电子,2019,(11):63.
　,Design of Intelligent Management System for Intersection Signal Lights[J].Machinery & Electronics,2019,(08):63.
[5]李 勋１,张伟军１,徐智卿２,等.狭小空间内孔高测量机器人设计及视觉定位方法研究[J].机械与电子,2019,(12):60.
　,,et al.Research on Design and Visual Positioning Method of Hole Height Measurement Robot in Narrow Space[J].Machinery & Electronics,2019,(08):60.
[6]潘泽锴,杨浩然.基于嵌入式的剑麻绳图像采集与检测系统[J].机械与电子,2020,(06):37.
　PAN Zekai,YANG Haoran. The Embedded Sisal Rope Image Acquisition and Detection System[J].Machinery & Electronics,2020,(08):37.
[7]孙 佩,胡小敏.基于图像特征提取的地铁客流量自动统计系统[J].机械与电子,2020,(10):17.
　SUN Pei,HU Xiaomin.Metro Passenger Flow Statistics System Based on Image Feature Extraction[J].Machinery & Electronics,2020,(08):17.
[8]李晓飞,张周强,张守京,等.基于LabVIEW的迈克尔逊干涉微位移测量方法研究[J].机械与电子,2021,(01):8.
　LI Xiaofei,ZHANG Zhouqiang,ZHANG Shoujing,et al.Research on Michelson Interference Micro-displacement Measurement Method Based on LabVIEW[J].Machinery & Electronics,2021,(08):8.
[9]杨玥旻,闫维新.基于图像处理的爬壁机器人焊缝识别与跟踪[J].机械与电子,2021,(03):65.
　YANG Yuemin,YAN Weixin.Welding Seam Recognition and Tracking Based on Image Processing for Wall-climbing Robot[J].Machinery & Electronics,2021,(08):65.
[10]沈钧贤,梅劲松,王 干,等.基于 CycleGan 的动车零件图像高光消除方法[J].机械与电子,2024,42(07):10.
　SHEN Junxian,MEI Jinsong,WANG Gan,et al.A Highlight Elimination Method for Train Parts Image Based on CycleGan[J].Machinery & Electronics,2024,42(08):10.

备注/Memo

备注/Memo:
收稿日期：2017-05-08
基金项目：中央高校基本科研业务费专项资金资助（2572017DY01）；黑龙江省自然科学基金资助（LC2015010）；黑龙江省博士后特别资助（LBH-Z12019）；国家自然科学基金资助（51305075）
作者简介：闫莉莉(1992-)，女，黑龙江鹤岗人，硕士研究生，研究方向为碳纤维增强铝基复合材料裂纹图像检测；张云鹤（1978-），男，吉林江源人，副教授，研究方向为碳纤维增强铝基复合材料的层间断裂韧性及检测。
更新日期/Last Update: 2017-08-25