[1]吉 莉,卯 杰.电机转子轴承拆卸工装的研制与应用[J].机械与电子,2019,(05):46-49.
 .Development and Application of Disassembly Tooling for Electronic Rotationg Shaft Bearing[J].Machinery & Electronics,2019,(05):46-49.
点击复制

电机转子轴承拆卸工装的研制与应用()
分享到:

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2019年05期
页码:
46-49
栏目:
机电一体化技术
出版日期:
2019-05-24

文章信息/Info

Title:
Development and Application of Disassembly Tooling for Electronic Rotationg Shaft Bearing
文章编号:
1001- 2257(2019)05-0046-04
作者:
吉 莉卯 杰
(贵州中烟工业有限责任公司毕节卷烟厂)
Author(s):
JILiMAOJie
( BijieCigaretteFactory,ChinaTobaccoGuizhouIndustrialCo., Ltd., Bijie551700, China)
关键词:
轴承拆卸工装
Keywords:
bearings disassemblytooling
分类号:
TH133
文献标志码:
A
摘要:
现阶段,电机被广泛应用于烟机设备中,成为烟机的核心部件。 与常用工具相比,特殊设备在对电机转子轴承拆卸方面节约了大量的人力物力,所以为解决烟机维修作业中遇到的电机转子轴承拆卸问题,需要研制一种针对毕节厂一车间现有烟机设备上,7.5kW 以下电机转子轴承的拆卸工装,并阐述该工装的结构特点和工作原理。 实际应用表明,该工装可有效降低对轴承的损伤,同时具有操作简单、作业效率高、省时省力及劳动强度低的优点。
Abstract:
Atpresent,themotoriswidelyusedincigarettemachineequipment, becomingthecorecomponentsofthecigarettemachine.Comparedwiththecommonlyusedtools,specialequipmentsavesalotoflabourforceandmaterialresourcesinthedisassemblyofmotorrotorbearings.Therefore,inordertosolvetheproblemofmotorrotorbearingdisassemblyencounteredinthemaintenanceoperationofcigarettemachine,itisnecessarytodevelopadisassemblytoolingformotorrotorbearingsunder7.5kWfortheexistingsmokemachineequipmentinaworkshopofBijiefactory.Thestructurecharacteristicsandworkingprincipleofthetoolingweredescribed.Thepracticalapplicationresultsshowthatthetoolingcaneffectivelyreducethedamagetothebearing,andhastheadvantagesofsimpleoperation,highoperationefficiencyandlowlaborintensity.

参考文献/References:

[1] 张 艳. 轴 承 的 拆 卸 方 法 [J]. 工 程 机 械 与 维 修,2013(4) :214.
[2] 李琴媛. 紧密纺小罗拉轴承拆卸器设计[J]. 科技创新与应用,2013(28) :50.
[3] 房燕,韩世成,蒋树义,等. 农业机械通用轴承拆卸装置的研制[J]. 江苏农业科学,2012,40(9) :362-365.
[4] 张福霞. 互换性与测量技术[M]. 武汉:西北工业大学出版社,2018.
[5] 濮良贵,陈国定,吴立言. 机械设计[M]. 北京:高等教育出版社,2013.
[6] 吕广庶,张远明. 工程材料及成形技术基础 [M]. 北京:高等教育出版社,2011.

相似文献/References:

[1]韩海燕,李娜娜,尚雪梅.颗粒间距及相对运动对轴承油膜压力的影响[J].机械与电子,2019,(03):27.
 HAN Haiyan,LI Nana,SHANG Xuemei.Effects of Particles Distance and Relative Motion on Oil Film Pressure of Bearing[J].Machinery & Electronics,2019,(05):27.
[2]孟庆宇.基于 EEMD- SVM 的自动扶梯主驱动轴轴承故障诊断方法研究[J].机械与电子,2020,(05):51.
 Research on Fault Diagnosis Method for Main Drive Shaft Bearing of Escalator Based on EEMD-SVM [J].Machinery & Electronics,2020,(05):51.
[3]魏常庆,张 皓.铁路货车轮毂对轴承压装力-位移曲线的影响研究[J].机械与电子,2024,42(05):76.
 WEI Changqing,ZHANG Hao.Research on the Influence of Railway Freight Car Hub on the Force Displacement Curve of Bearing Press Mounting[J].Machinery & Electronics,2024,42(05):76.
[4]骆东松,马立东.基于深度学习的风电机组轴承诊断系统[J].机械与电子,2024,42(07):69.
 LUO Dongsong,MA Lidong.Deep Learning based Bearing Diagnosis System for Wind Turbines[J].Machinery & Electronics,2024,42(05):69.
[5]武 逵,王城宇,万书亭.基于 IGWO-MCKD-ROMP 的齿轮箱轴承故障特征提取方法[J].机械与电子,2025,(01):3.
 WU Kui,WANG Chengyu,WAN Shuting.Fault Feature Extraction Method of Gearbox Bearings Based on IGWO-MCKD-ROMP[J].Machinery & Electronics,2025,(05):3.

备注/Memo

备注/Memo:
收稿日期:2019-01-10作者简介:吉 莉 (1983-) ,女,贵州毕节人,助理工程师,研究方向为烟用材料研究入物流工程;卯 杰 (1986-) ,男,贵州毕节人,技师,研究方向为机械制造。
更新日期/Last Update: 2019-10-30