[1]程 鹏,饶建华,刘东升.高温高压活塞-圆筒式装置控制系统的设计研究[J].机械与电子,2021,(01):52-55.
　CHENG Peng,RAO Jianhua,LIU Dongsheng.Design of Control System for High Temperature and High Pressure Piston-Cylinder Apparatus[J].Machinery & Electronics,2021,(01):52-55.
点击复制

高温高压活塞-圆筒式装置控制系统的设计研究()
分享到：

机械与电子[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2021年01期
页码:
52-55
栏目:
机电一体化技术
出版日期:
2021-01-20

文章信息/Info

Title:
Design of Control System for High Temperature and High Pressure Piston-Cylinder Apparatus
文章编号:
1001-2257(2021)01-0052-04
作者:
程 鹏1; 饶建华1; 刘东升2

1.中国地质大学（武汉）机械与电子信息学院，湖北 武汉 430074

2.内蒙古北方重工业集团有限公司产品研究院，内蒙古 包头 014030

Author(s):
  CHENG Peng1; RAO Jianhua1; LIU Dongsheng2
1.School of Mechanical and Electronic Information, C hina University of Geosciences, Wuhan 430074, China
 2.Research Institute of Product,Inner Mongolia North Heavy Industries Group Co., Ltd., Baotou 014033 , China
关键词:
高温高压; PLC; 自动控制
Keywords:
 ; high-temperature and high-pressure;  PLC;  automatic controls
分类号:
TP273
文献标志码:
A
摘要:
提出一种以工业触摸屏/PC-PLC/温控器为核心的高温高压活塞-圆筒式装置控制系统。首先根据装置需求分析确定了控制系统的整体方案，然后设计了控制系统的硬件系统，其通过工业触摸屏与PC实现用户交互，以PLC与温控器作为压力和温度控制器。结合本系统特点，提出一种基于变比例PID的压力控制策略，可实现PID控制参数的实时调整。在搭建样机上进行实验,结果表明控制系统具有良好的控制效果，满足控制系统的设计要求。
Abstract:
A hightemperature and highpressurepiston-cylinder apparatus control system based on HMI/ PC-PLC/temperature controller is proposed. Firstly, the overall scheme of the control system is determined according to the demand analysis of the device.Then, the hardware system of the control system is designed. It realizes the user interaction through the industrial touch screen and PC, and takes PLC and temperature controller as the pressure and temperature controller. On this basis, t he HMI program, PC monitoring program , and PLC pressure control program are developed by analyzing the functional requirements of the control system. The test results on the prototype show that the control system has a good control effect and meets the design requirements .

参考文献/References:

[1] LIEBERMANN R. Multi-anvil, high pressure apparatus: a half-century of development and progress [J]. High pressure research, 2011, 31(4): 493-532.

[2] ZHANG Y, WANG Y, WU Y, et al. Phase transitions of harzburgite and buckled slab under eastern China [J]. Geochemistry, geophysics, geosystems, 2013, 14: 1182-1199.

[3] 胡洋. 超高压液压缸试验台增压系统的研究[D].秦皇岛:燕山大学,2014.

[4] 刘强,金振民. Piston-Cylinder高温高压实验装置及在壳幔动力学研究中的应用[J]. 地质科技情报,2006,25(5):8-14.

[5] 毕见卫.基于OPC和LabVIEW的数据采集系统在工业测控中的应用研究[D].成都:西华大学,2008.

[6] 高强. 基于S7-200 PLC干粉配制系统的设计与实现[D].大连:大连交通大学,2015.

[7] 杨俊,马世伟. 基于ModBus协议的导丝辊同步及温控系统设计与实现[J]. 仪表技术,2012,(12):37-40.

[8] 束长宝. 基于Modbus RTU协议的剪板机变频控制[J]. 仪表技术与传感器, 2012(12):118-120.

[9] 王正富, 刘觉民, 陈雄. 基于MODBUS协议的发电机原动系统仿真器监控系统的设计[J]. 仪表技术与传感器, 2009(9):36-38,41.

相似文献/References:

[1]蒋 波１,３,周自强２,等. 基于ＰＬＣ的报废汽车拆解线作业控制系统[J].机械与电子,2019,(01):54.
　,,et al.PLC-based ELV Disassembly Line Operation Control System[J].Machinery & Electronics,2019,(01):54.
[2]吕栋腾.一种垂直升降立体车库控制系统的设计[J].机械与电子,2019,(08):50.
　Control System Design of Vertical Lifting Three-dimensional Garage[J].Machinery & Electronics,2019,(01):50.
[3]熊征伟.智能存取货无人转运车电液控制系统设计[J].机械与电子,2019,(06):38.
　Design of Electro-hydraulic Control System for Intelligent Access Unmanned Cargo Transfer Car[J].Machinery & Electronics,2019,(01):38.
[4]熊征伟,章 鸿.一种基于ＰＬＣ的多功能智能分拣机自动控制系统设计与应用[J].机械与电子,2019,(05):11.
　.Design and Application of Automatic Control System of a Multi-function Intelligent Sorting Machine Based on PLC[J].Machinery & Electronics,2019,(01):11.
[5]张雨新,于 洁,王震生,等.基于ＰＬＣ的激光熔覆机自动控制系统设计[J].机械与电子,2019,(02):48.
　,,et al.Design Laser Cladding Machine Automation Control System Based on PLC[J].Machinery & Electronics,2019,(01):48.
[6]何世涛,欧阳清,鲁付杰,等.消防云梯车自动调平系统及调控策略研究[J].机械与电子,2016,(12):8.
　HE Shitao,OU Yangqing,LU Fujie,et al.Study on Automatic Leveling System and Control Strategy of Aerial Ladder Truck[J].Machinery & Electronics,2016,(01):8.
[7]赵迎春.YJ27型滤嘴接装机电气系统的设计与研究[J].机械与电子,2016,(03):28.
　ZHAO Yingchun.Design and Research of the Electrical System for YJ27 Filter Tipping Machine[J].Machinery & Electronics,2016,(01):28.
[8]程阳,周雄兵.基于PLC的起动器自动装配机研制[J].机械与电子,2016,(03):36.
　CHENG Yang,ZHOU Xiongbing.The Development of Automatic Assembly Machine Based on PLC[J].Machinery & Electronics,2016,(01):36.
[9]赵迎春,刘旭东,李彬彬.关于制丝线中YT602叶片处理段电控系统的研究[J].机械与电子,2016,(05):33.
　ZHAO Yingchun,LIU Xudong,LI Binbin.Study on the Electronic Control System of YT602 Blade Processing Section in the Silk Production Line[J].Machinery & Electronics,2016,(01):33.
[10]刘少军,张思雨.自动化立体停车场的监控系统设计[J].机械与电子,2016,(06):49.
　LIU Shaojun,ZHANG Siyu.Design of the Monitoring System of Automatic Three-dimensional Parking Lot[J].Machinery & Electronics,2016,(01):49.

备注/Memo

备注/Memo:
收稿日期：2020-07-23
作者简介: 程 鹏（1992— )，男，山西长治人，助理工程师，博士研究生，研究方向为机电一体化和空间折展机构设计;饶建华(1962— )，男，湖北孝感人，教授，博士，研究方向为机电一体化。
更新日期/Last Update: 2020-12-28