[1]黄爱武.微风速风机特征风速及风轮大小选择的研究[J].机械与电子,2015,(06):38-42.
　HUANG Aiwu.A Study of Basic Parameters of Breeze Turbines[J].Machinery & Electronics,2015,(06):38-42.
点击复制

微风速风机特征风速及风轮大小选择的研究
分享到：

《机械与电子》[ISSN:1001-2257/CN:52-1052/TH]

卷:
期数:
2015年06期
页码:
38-42
栏目:
机电一体化技术
出版日期:
2015-06-26

文章信息/Info

Title:
A Study of Basic Parameters of Breeze Turbines
文章编号:
1001-2257(2015)06-0038-05
作者:
黄爱武
(许昌许继风电科技有限公司,河南 许昌 461000)
Author(s):
HUANG Aiwu
(Xuchang Xuji Wind Power Technology Co.,Ltd.,Xuchang 461000,China)
关键词:
微风速风场;  仿真;  额定风速;  风轮大小;  CP-v曲线
Keywords:
wind field;  simulation;  rated wind speed;  wind wheel size;  CP-v curve
分类号:
TK81
文献标志码:
A
摘要:
根据我国风力发电基础技术研究相对薄弱的特点,通过比对国内外有关资料,给出我国中东部地区微风速风场的风速特征参数以及适宜的空气密度特征参数,弥补了国内微风速风场相关数据不足的空白; 进而研究了2 MW微风速风机额定风速的确定办法,以及2 MW微风速风机的风轮大小、切入风速、切出风速的计算和选取方法; 最后,通过提出CP-v曲线拟合假说,从业主的投资与收益角度出发,给出一种风机风轮大小选择的方法和辅助参考。
Abstract:
In view of the lack of current research on wind power and the present situation of China, the characteristic parameters of the wind fields in Central-Eastern China are given by comparing national and foreign data. This paper fills a gap in the research on national breeze wind turbines by calculating basic parameters for the breeze turbine, such as rated wind speed, the wind wheel diameter, the cut-in and cut-out wind speeds of 2 MW turbines. Finally, by providing a hypothesis on the closest fit CP-v curve, and analyzing from the perspective of the owner's investment and return on investment, this paper provides a method and a reference source for selecting the wind wheel size of a breeze speed fan.

参考文献/References:

[1]孟卫平,李平,司林波.我国风电设备整机制造业的现状及对策分析[J].燕山大学报:哲学社会科学版,2011,11(2):46-51.
[2]周超,朱熀秋,魏杰,等.我国风力发电发展现状及问题分析[J].能源研究与信息,2012,28(2):69-74.
[3]中国风能协会.1.5 MW、2 MW风电机组风轮直径发展趋势[EB/OL]. http://mp.weixin.qq.com/s?__biz=MjM5Njc0ODgwNA==&mid=200181367&idx=1&sn=3c8b9d32a8e6979be035d85b30a709ab&3rd=MzA3MDU4NTYzMw==&scene=6#rd,2014-04-25.
[4]中国气象局风能太阳能资源评估中心.中国风能资源评估报告(2009)[M].北京:气象出版社,2010.
[5]水电水利规划设计总院.各省(区、市)风能资源开发规划研究报告编制大纲[EB/OL]. http://www.renewable.org.cn/shownews.jsp?id=8ad6808848105f6c0148aee735400036&funid=95 modulid=7&type=content,2014-09-25.
[6] GL2010,Guideline for the Certification of Wind Turbines Edition2010[S].Hamburg:Germanischer Lloyd,2010.
[7]张江华.风电场安全风速计算方法研究[J].黑龙江电力,2007,29(6):450-452.
[8]王淼,曾利华.风速频率分布模型的研究[J].水力发电学报,2011,30(6):204-209.
[9]张玉良,李仁年,李晓鹏,等.基于迭代算法的最小风轮直径数学模型[C]//中国工程热物理学会.2007年流体机械学术会议论文集,2007:217-221.
[10]薛桁,朱瑞兆,杨振斌.沿海陆上风速衰减规律[J].太阳能学报,2002,23(2):207-210.
[11]百度文库.全国各地海拔高度及大气压[EB/OL].http://wenku.baidu.com/view/ef0dcce919e8b8f67c1cb98b.html?from=rec&pos=0&weight=19.2011-05-06.
[12]王振坤.中国气候(气温和降水)[EB/OL].http://wenku.baidu.com/view/12b23ae8d15abe23482f4d66.html.2013-11-25.
[13]王晓林.风功率密度等级划分和风能区划的修订建议[J].电力技术,2010,19(8):450-452.
[14]屈圭,林峰.1.2MW风电机叶轮气动性能分析与仿真[J].暨南大学学报:自然科学版,2009,30(5):523-527.
[15]廖明夫,Gasch RTwele J.风力发电技术[M].西安:西北工业大学出版社,2009.

相似文献/References:

[1]王洪亮,周 洁,罗灵琳.基于LQR控制器的直线倒立摆研究及设计[J].机械与电子,2018,(04):3.
　WANG Hongliang,ZHOU Jie,LUO Linglin.Study and Design of Linear Inverted Pendulum Based on LQR Controller[J].Machinery & Electronics,2018,(06):3.
[2]何林涛,张克非,胡家渝.毫米波有源相控阵天线热设计[J].机械与电子,2018,(03):23.
　HE Lintao,ZHANG Kefei,HU Jiayu.Thermal Design of Millimeter-Wave Active Phased Array Antenna[J].Machinery & Electronics,2018,(06):23.
[3]张超,周自强,谭翰墨,等.基于PC-Interface的机器人拆卸操作仿真研究[J].机械与电子,2018,(03):65.
　ZHANG Chao,ZHOU Ziqiang,TAN Hanmo,et al.Simulation of Robotic Disassembly Operation Based on PC-Interface[J].Machinery & Electronics,2018,(06):65.
[4]刘佳,郎宝华.SVPWM在电梯能量回馈中的应用[J].机械与电子,2017,(10):31.[doi:1001-2257(2017)10-0031-05]
　LIU Jia,LANG Baohua.Application of SVPWM in Elevator Energy Feedback[J].Machinery & Electronics,2017,(06):31.[doi:1001-2257(2017)10-0031-05]
[5]梁辉,杨加礼,王蕾,等.3_UPU+3_RPS并串联机构的运动学分析及仿真[J].机械与电子,2017,(10):40.[doi:1001-2257(2017)10-0040-04]
　LIANG Hui,YANG Jiali,WANG Lei,et al.Kinematics Analysis and Simulation of 3_UPU+3_RPS Parallel-series Mechanisms[J].Machinery & Electronics,2017,(06):40.[doi:1001-2257(2017)10-0040-04]
[6]雷永锋,孙莉莉,夏俊萍.基于UC3845的反激式低压供电电源研究[J].机械与电子,2017,(10):57.[doi:1001-2257(2017)10-0057-04]
　LEI Yongfeng,SUN Lili,XIA Junping.Research on Flyback Low Voltage Power Supply Based on UC3845[J].Machinery & Electronics,2017,(06):57.[doi:1001-2257(2017)10-0057-04]
[7]张 尧.某无人机机载雷达结构轻型化设计[J].机械与电子,2017,(07):31.
　ZHANG Yao.Lightweight Design of Airborne Radar Structure for an Unmanned Aerial Vehicle[J].Machinery & Electronics,2017,(06):31.
[8]魏 静.采用Matlab和误差函数法对轨迹生成四杆机构的优化及仿真[J].机械与电子,2016,(01):11.
　WEI Jing.Using Matlab and Error Function Method for Trajectory Generation Optimization and Simulation of Four-bar Mechanism[J].Machinery & Electronics,2016,(06):11.
[9]李元鹏,郭 疆,邵明东.基于被动力反馈的遥操作电液控制系统[J].机械与电子,2015,(11):47.
　LI Yuanpeng,GUO Jiang,SHAO Mingdong.A Type of Teleoperated Electro-hydraulic Control System Based on Passive Force Feedback[J].Machinery & Electronics,2015,(06):47.
[10]张 兵,邓子龙.夹具实验台液压系统的仿真与优化[J].机械与电子,2015,(01):45.
　ZHANG Bing,DENG Zilong.Simulation and Optimization for Clamp Experiment Table Hydraulic System[J].Machinery & Electronics,2015,(06):45.

备注/Memo

备注/Memo:
收稿日期:2015-01-05
作者简介:黄爱武(1969-),男,河南洛阳人,高级工程师,兼职教授,主要从事风机高级过程质量控制、风电齿轮箱研发等工作。
更新日期/Last Update: 2015-06-26